ATA Devices
From VoIP.ms Wiki
Blog Articles
- VoIP – Bring Your Own Device (BYOD): To be able to place or receive calls using VoIP, you may need a hardware setup that will allow you to use your regular phone (ATA) or a special phone that connects directly to VoIP networks (IP Phone). For more information, Take a peek at our blog article VoIP – Bring Your Own Device (BYOD)
- ATA: An Analog Telephone Adapter is a device used to connect one or more standard analog telephones to a digital telephone system (such as Voice over IP) or a non-standard telephone system. Still not clear? Take a peek at our blog article : Back to Basics - What is an ATA?
Looking for a IP Phone? Click here to see all models.
Contents |
ATAs
Atcom AG188N
Product: Atcom AG188N
Company: Atcom
Overview: AG188N voice gateway is an Internet-based one port voice gateway. AG188N ATA adapts multi-voice control protocols and voice compression codec to directly convert analog voice into IP packet for internet transport, thus effectively using the existing bandwidth to provide PSTN quality voice service.
AG188N ATA one FXS voice over IP gateway supports SIP, and IAX2 protocol, offering one 10/100Mbps Ethernet interface, one RJ11 telephone interface, one built-in router, and lifeline port. AG-188N ATA is small and can be widely used in SOHO, small office and enterprise branches.
Auerswald COMpact 5010
Product: Auerswald COMpact 5010
Company: Auerswald
Overview: Communication center for small companies and ambitious private users with ample expansion possibilities
The COMpact 5010 VoIP makes an ideal communication center for agencies, law firms and small craft businesses as well as the technology-conscious. With the according modules, it gives you 8 trunk lines (analog, ISDN, VoIP) and connections for 10 internal participants (analog, ISDN, VoIP). And if you want, our Automatic Update will always keep the operating software of your COMpact system up to speed!
Cisco
Cisco Linksys PAP2
Product: Linksys PAP2
Company: Cisco
Overview: The Linksys PAP2 is an analog telephony adapter (ATA), which allows for the connection of up to two analog telephones to a soft switch or VoIP carrier using Session Initiation Protocol (SIP). The physical connections on the device are two RJ11 jacks for the telephones and one RJ45 jack for ethernet. The ethernet connection is 10 Mbit/s, half-duplex. The device is configured through a web interface. Each analog telephone is presented as a distinct SIP user.
Cisco Linksys PAP2T
Product: Linksys PAP2T
Company: Cisco
Overview: The Cisco PAP2T Internet Phone Adapter with 2 VoIP Ports enables high-quality feature-rich VoIP service through your broadband Internet connection. Just plug it into your home router or gateway and use the two standard telephone ports to connect analog phones or fax machines. Each phone port operates independently, with separate phone service and phone numbers, like having two telephone lines. You'll get clear reception and reliable fax connections, even while using the Internet.
With Internet telephony, along with low domestic and international phone rates, impressive arrays of special telephone features are available. Choose your preferred local dialing number, regardless of where you live. Or add a virtual telephone number to have forwarded to your Internet phone. You can even add a toll-free number. The Cisco PAP2T Internet Phone Adapter is compatible with these and all of the other special telephone features that are available from your Internet telephone service provider, such as caller ID, call waiting, voicemail, call forwarding, distinctive ring, and much more.
See Configuration Details
See Configuration Details with Static IP
Cisco SPA112 and SPA122
Product: SPA112, SPA122
Company: Cisco
Overview: The Cisco SPA112 2 Port Adapter connects to VoIP service through a wired broadband Internet connection and provides two virtual telephone's (FxS) lines to which standard touch-tone 'phones may be connected. The SPA122 is very similar to the SPA112 but includes a second network connection, allowing it to be installed as a bridge or router.
Both include two standard telephone ports to easily connect existing analog phones or fax machines. Each phone line can be configured independently.
Introduced in late 2011, this box represents an inexpensive means to continue using existing analog hardware while migrating to voice over IP.
Cisco WRP400 and WRP500
Product: WRP400, WRP500
Company: Cisco
Overview: The Cisco WRP400/WRP500 wi-fi routers connect to VoIP service through a wired broadband Internet connection and provide two virtual telephone's (FxS) lines to which standard touch-tone 'phones may be connected. These devices effectively deliver a complete local area network and a two-line analog telephone adapter in one box.
The WRP400 provided a wired LAN (four 100baseT downlink ports), plus full-featured wireless B/G networking. Its faster but more expensive successor, the WRP500, provides quicker wi-fi (802.11ac, dual-band) and wired LAN (1000baseT) connections. If wired Internet is not available, uplink for these routers can fall back to a mobile Internet connection if appropriate hardware is connected to the USB port.
The telephony capabilities of the WRP400/WRP500 are very similar to the SPA122. Both include two standard telephone ports to easily connect existing analog phones or fax machines. Each phone line can be configured independently. T.38 faxing is supported if a provider provides this capability.
Cisco SPA2100 Phone Adapter
Product: Cisco SPA2100 Phone Adapter
Company: Cisco
Overview: Inexpensive, easy to install, and simple to use, the Cisco® SPA2100 Phone Adapter with Router (Figure 1) connects a standard telephone or fax machine to an IP-based data network. Voice over IP (VoIP) service providers can offer residential and business users traditional and enhanced communication services via the customer's broadband connection to the Internet.
The Cisco SPA2100 features two basic telephone ports to connect existing analog phones or fax machines to a private branch exchange (PBX) system. It also includes two RJ-45 Ethernet interfaces to connect to a home or office LAN, as well as an Ethernet connection to connect a broadband modem or router (WAN). Each phone line can be configured independently via software controlled by the service provider or the end user. With the SPA2100, users are able to protect and extend their investment in their existing analog telephones, conference speakerphones, and fax machines, as well as control their migration to IP with an extremely affordable, reliable solution.
Cisco SPA2102 Phone Adapter with Router
Product: Cisco SPA2102 Phone Adapter with Router
Company: Cisco
Overview: Inexpensive, easy to install, and simple to use, the Cisco SPA2102 Phone Adapter with Router connects a standard telephone or fax machine to an IP-based data network. Voice over IP (VoIP) service providers can offer residential and business users traditional and enhanced communication services via the customer's broadband connection to the Internet.
The Cisco SPA2102 features two basic telephone ports to connect existing analog phones or fax machines to a private branch exchange (PBX) system. It also includes two 100BASE-T RJ-45 Ethernet interfaces to connect to a home or office LAN, as well as an Ethernet connection to connect a broadband modem or router (WAN). Each phone line can be configured independently via software controlled by the service provider or the end user. With the SPA2102, users are able to protect and extend their investment in their existing analog telephones, conference speakerphones, and fax machines, as well as control their migration to IP with an extremely affordable, reliable solution.
Grandstream
Grandstream HandyTone 486
Product: Grandstream HandyTone 486
Company: Grandstream
Overview: Grandstream's award-winning HandyTone-486 is an all-in-one VoIP integrated access device that features superb audio quality, rich functionalities, high level of integration, compactness, and ultra-affordability. The HandyTone-486 is fully compatible with SIP industry standard and can interoperate with many other SIP compliant devices and software on the market.
Grandstream HandyTone-486 has been awarded the Best of Show product in 2004 Internet Telephony Conference and Expo.
Grandstream HandyTone 502 - HT502
Product: Grandstream HandyTone 502 - HT502
Company: Grandstream
Overview: The HT502 is a powerful VoIP router. The product's inclusion of an integrated high-performance NAT router and 10Mbps Ethernet WAN and LAN ports enables a shared broadband connection between multiple ethernet devices.
In addition to being SIP 2.0 standard compliant, the product supports Universal Plug-in-Play (UPnP), up to 2 SIP account profiles, and advanced telephony features. It provides two lines (FxS), supporting both tone and pulse dial for compatibility with any standard telephone.
Enhanced security
Automated provisioning using symmetric and asymmetric voice
Support for a broad range of popular voice codec
Grandstream HandyTone 702 - HT702
Product: Grandstream HandyTone 702 - HT702
Company: Grandstream
Overview: The HT702 is Grandstream´s Newest powerful VoIP router. The product's inclusion of an integrated high-performance NAT router and 10Mbps Ethernet WAN and LAN ports enables a shared broadband connection between multiple ethernet devices.
In addition to being SIP 2.0 standard compliant, the product supports Universal Plug-in-Play (UPnP), up to 2 SIP account profiles/Phones and advanced telephony features.
Enhanced Security
Automated provisioning using symmetric and asymmetric voice
Support for a broad range of popular voice codec
Grandstream HandyTone 802 - HT802
Product: Grandstream HandyTone 802 - HT802
Company: Grandstream
Overview: The HT802 delivers powerful VoIP technology and routing capabilities to home and office environments, and allows users to successfully connect their analog devices to a manageable and powerful VoIP network. Built upon Grandstream’s market-leading SIP ATA/gateway technology, with millions of units successfully deployed worldwide, this powerful ATA features exceptional voice quality in various applications and environments.
The HT802 comes with 2 easy-to-use FXS ports, state-of-the-art encryption with a unique security certificate per unit, automated provisioning for volume deployment and device management and outstanding network performance.
TLS and SRTP security encryption technology to protect calls and accounts
Supports 2 SIP profiles through 2 FXS ports and a single 10/100Mbps port
Support for a broad range of popular voice codec
Mediatrix C7 and Mediatrix 4100 Series
Product: : Mediatrix C7 and Mediatrix 4100 Series running DGW 2.0 firmware
Company: Media5 Corporation
Overview: The Mediatrix® C7 and Mediatrix® 4100 Series feature VoIP adaptors that interconnect up to 24 analog telephones, faxes, and modems ports into SIP-based systems. These series allow operators to shorten deployment time to enable cloud telephony services into branch offices and SMBs.
The DGW 2.0 firmware also offers security features such as SIP over TLS, SRTP, certificates management, and HTTPS designed to bring enhanced security for the network management, SIP signaling, and media transmission aspects.
Netgear WGR615V
Product: WGR615V
Company: Netgear
Overview: The WGR615V was never sold directly to the public when it was new, but since the model is discontinued, lots of them are being sold. It is a wireless (802.11 G) router that happens to have a built-in ATA. It is possible to use just the ATA part.
OBiHAI (Polycom)
OBi 100/110 & OBi 200
Product: OBi 100/110 & OBi 200
Company: Polycom (OBIHAI Technology Inc)
Overview: With OBi devices you are in control of your communications life. From the OBi's on-board connections as well as via the Internet, you have the power to bridge mobile, fixed line and Internet telephone services. The OBi100 & OBi110 are stand-alone, dedicated devices, built with a high-performance "system on a chip" platform to ensure high-quality voice conversations. Every OBi device has high availability and reliability. It is 'always-on' to make or receive a call. With an OBi device, a computer is not required and a computer does not need to be on to talk on the phone or use the OBi's powerful service bridging features. To get started, all you need is a phone, power and a connection to the Internet.
The OBi110 has one phone port and one line port. Use the OBi110 when you need an analog line connection to a traditional telephone network or service. Think of the OBi110 LINE port as a gateway to traditional phone service. If you do not have traditional phone service at home, then the OBi100 is probably the right product to get.
Polycom OBi300
Product: Polycom OBi300
Company: Polycom
Overview: Polycom OBi300 expands your service portfolio by enhancing the communication possibilities of home offices with flexibility in voice, fax and modem applications as they transition to the digital communications world.
- Flexible voice and fax applications
- Help home offices maximize current analog investment by keeping one analog phone or fax machine and connect them to VoIP services
- Supports T.38 fax standard so home office users can send or receive reliable facsimile calls over the Internet
Telco AC-211
Product: Telco AC-211
Company: Telco
Overview: Telco AC-211 is a SIP ATA supporting two lines and numerous configuration options. This ATA is most commonly found as the AC-211-SR & AC-211N from the now-defunct SunRocket service. This device works well with VoIP.ms once configured.
TP-Link TD-VG3631
Product: TP-Link TD-VG3631
Company: TP-Link
Overview: High-speed DSL modem, NAT router, and wireless access point in one device providing a one-stop networking solution Wireless N speed up to 300Mbps makes it ideal for heavy bandwidth consuming or interruption sensitive applications like online gaming, Internet calls and even the HD video streaming Supporting both traditional landlines and VoIP network offers you a multiple choice when making phone calls. Various call features such as caller ID, call waiting, call holding, call forwarding, 3-way conference calls and voicemail USB 2.0 port supports Storage Sharing (Samba or FTP), Media Server, Print Server and multi accounts Ethernet WAN (EWAN) offers another broadband connectivity option for connecting to Cable, VDSL or Fiber modems IP based Bandwidth Control makes it easier for you to manage the bandwidth of devices that connected to the modem router Wi-Fi On/Off Button allows users to simply turn their wireless radio on or off.
