Cisco IP Phone 7940/7960

From VoIP.ms Wiki

Configuration Details

1. Press **# to unlock the Configuration Protection

2. Press Settings button

3. Go to "Network Configuration" to set the IP connectivity

4. Go to SIP Configuration

5. Select Line 1

• In Name and Authentication Name enter your VoIP.ms username(e.g. 100000)

• Enter your VoIP.ms password

• Enter atlanta.voip.ms as Proxy Address

• Configure Preferred Codec to g729a

• Press Back and then Save to apply changes.

As an additional recommendation, Set "NAT enabled" to Yes, and on the "NAT address" parameter, enter the IP address of Router or firewall if, any.