Callroute
From VoIP.ms Wiki
Developed by sipsynergy, Callroute is an advanced call routing, number management and user provisioning solution.
It allows you to connect any phone system together and to any service provider without the need for any infrastructure or deep technical knowledge.
Check out all the features they offer: XCALLY Callroute Features
Contents |
Callroute configuration for VoIP.ms
With a user-friendly interface, Callroute will let you easily add VoIP.ms as your carrier.
In this section, we will go through the steps to do this.
Add VoIP.ms as carrier
Once you have got access to the Callroute platform, login and click on your user to start setting up your phone system.
On the main screen, you will have a menu on the left side where you will find all the tools necessary to set up everything.
To add VoIP.ms as your carrier, click on the Carriers menu and then click on the button Connect a carrier +.
In the next page, locate VoIP.ms and click on the button Connect. Then, you will need to enter the following information:
- Label: This can be any name of your choice (E.g. VoIP.ms).
- Username: Your Main or Sub-Account username (E.g. 100000 or 100000_MySubAccount).
- Password: The password of the account that you're trying to connect Callroute with.
Click on the button Add carrier once you have entered the right configuration.
After this, Callroute will confirm the configuration was successful. In your customer portal, you should also notice the status of the account used will change to Registered.
