Auerswald COMpact 5010

From VoIP.ms Wiki

After you have logged in to your device configuration screen, please enter the following information.

Configuration Details

Step 1

Under Voice Over IP (VoIP) >> Providers, enter the following:

Domain:

Registrar:

NAT Transversal:

Interval for NAT Keep-Alive (35-255 Sec.)

Outbound Proxy

SIP Port:

Step 2

Under the next tab Voice Over IP (VoIP) >> Accounts, enter the following:

Select the provider that you have entered on Step 1 (Voipms), then under Kind of Connection select PTMP Connection, finally click the button Configure. You can see these settings on the following screen shot.

Now on the following screen, set the following.

Account Name: The name that was chosen in Setup Account 1 Country Prefix: E.g. 001 for NAMP or 01141 for Switzerland Area code: 201 for New York Country: Technically the country that correspondence with the country prefix, however there is a back in this version of the firmware and only "Germany" can be chosen. It does not have any effect on the functionality Exchange line access number (account number): The internal number in the PBX for this account. Can be used to dial-out directly and override the set up for external line preference User name: User name chosen Password: Password chosen Authorization ID: Can be left blank Multiple subscriber numbers (MSNs): The phone number(s) chosen/assigned by VoIP.ms Display name: Assign a unique display name (16 characters max.) for the MSN Ringer rhythm: Optionally, you can select the ringer rhythm that should be used for the MS