Zycoo ZP502

From VoIP.ms Wiki

Configuration Details

Step 1

Once you confirm this phone is connected to your network, from your PC ( which should be connected to the network too ), enter the IP address of the wan port in this phone as the URL (e.g. http://xxx.xxx.xxx.xxx/ or http://xxx.xxx.xxx.xxx:xxxx/). If you do not know the IP address, you can look it up on the phone’s display by pressing navigation "down" button.

In the login page you will need to enter the username and password

1. Default user with general level -> username：guest / password：guest

2. Default user with root level -> username：admin / password：admin

 The default password of phone screen menu is 123. After you configure the ip phone, you need click save button in config under Maintenance 
 in the left catalog to save your configuration. Otherwise the phone will lose your modification after power off and on.

Step 2

Under the LINE 1 Tab, Find the following fields and fill them with the following information

Proxy: atlanta.voip.ms (one of our multiple servers)
Display Name: John Smith (your name or company name)
User ID: 100000 (your VoIP.ms username)
Password: ******** (the account password)
Register Expires: 180
Proxy Fallback Intvl: 180
Nat Keep Alive: Yes
Nat Mapping/Traversal: Yes

Step 3

Under the LINE 1 Tab, Find the following fields and fill them with the following information

Proxy: atlanta.voip.ms (one of our multiple servers)
Display Name: John Smith (your name or company name)
User ID: 100000 (your VoIP.ms username)
Password: ******** (the account password)
Register Expires: 180
Proxy Fallback Intvl: 180
Nat Keep Alive: Yes
Nat Mapping/Traversal: Yes