Dinstar C60 series

From VoIP.ms Wiki

This guide applies to the Dinstar C60UP, C62, C63, C64 & C66 IP Phones.

Configuration steps

Once you have connected your device to your local connection, it will be necessary to obtain the local IP address that was designated for it. From your IP phone navigate through the menus to obtain its IP address. To achieve this, press the “OK“ button to check IP address of the IP Phone, OK->IPv4->X.X.X.X .

Then login to the web of the IP phone. Default username and password are admin/admin. Once in the GUI, go to Account-> Basic page and from there you will need to fill your account information to register.

Under SIP Account

• Account:Your accountID, being either your main account or sub account.
• Active: Set it to Enabled
• Display Label: Set your accountID, being either your main account or sub account.
• Display Name: Set your callerID name here. Either your name, business, etc.
• Register Name: Set your accountID, being either your main account or sub account.
• Username: Set your accountID, being either your main account or sub account.
• Password: Set your account password for your main account or sub account.

Under SIP Server

• Server IP: Set the server you wish to register to here.
• Registration Expires: 1800

Proceed by pressing submit.