Zoiper 5

From VoIP.ms Wiki

Contents 1 Configuration Detail 1.1 Setting up Zoiper with your SIP/IAX credentials 2 Common Errors

Configuration Detail

Setting up Zoiper with your SIP/IAX credentials

1. Start Zoiper 5 Softphone.

2. On the welcome screen fill the Username and Password then click on Login

• Username: 100000 (replace with your main VoIP.ms account number or sub-account name)
• Password: ********* (replace with your main SIP or sub-account password)
  

3. On the host screen, fill the Hostname or Provider with any of our servers. i.e. toronto.voip.ms then click on Next.

Note: Bear in mind to use the same VoIP server your VoIP number is using. 
You can check what VoIP server is your VoIP number using, from your VoIP.ms customer portal 
at DID Numbers>> Manage DIDs, under POP column. 
You can choose any server you want, as long as the one in your portal and the one in this field matches, 
otherwise, incoming calls won't ring.

4. The Authentication step is optional, you can skip it.

5. In this screen you can select the protocol that your SIP account will use:

• SIP TLS
• SIP TCP
• SIP UDP
• IAX UDP

Select the one you prefer according to your network's settings, i.e. SIP TCP then click on the Finish button.

Note: If you choose TLS please refer to section 2.2.1 for some extra adjustments, only if they are needed. When choosing TLS, Zoiper should adjust these parameters automatically.

Done, at this point your VoIP.ms SIP account should be marked with a green tick arrow next to its name. This means your softphone is ready to start placing calls.

• This the account configuration screen and will show a summary of your account information:
  • User: 100000 (this is your SIP/IAX Main Username showing up in your customer portal)
  • Password: ********* (this is your SIP password.)
  • Domain: toronto.voip.ms (use one of the multiple VoIP.ms servers)

• Click on the Advanced button.

• On the advanced settings you can set the Registry expiration setting. By default Zoiper has it on TCP 600s, you can set it for UDP 60s or custom and set it for 180 or 300 seconds. The recommended value is 300 seconds (5 minutes).

• Scroll down to Audio Codecs., the ones on the right are the codecs available, leave only as selected codecs, u-Law and GSM and G.729(if available with the version). Set the rest to the left side.

• Click on the X in the left corner to leave the settings, you'll be prompted to save them, accept the change.

• Your Zoiper should be ready to make calls

Common Errors

• If there was a typo in your password or if there's a DNS issue Zoiper might show the account type options in red. In this case, you can click on the skip button

• When prompted to manually configure an account choose yes and configure the account on the Zoiper account settings page.

• On this screen you can check the error response code and correct it. You can check the list of common SIP Response codes for this.