Linphone
From VoIP.ms Wiki
Configuration Detail
- Start Linphone Softphone
- Click on the Assitant option.
- Select the option Use a SIP Account.
- Fill in the information according to your account
- Username: Your Main account or sub account username (six digit number) E.G 123456 / 123456_XX (the underscore has to be used for sub-accounts)
- Display Name: Your name or company name. (See the requirements below)
IMPORTANT - Display Name
- Entering outbound Caller ID Name, it must be in CAPITAL LETTERS. This will appears more clearly/visible on some devices.
- You must NOT use any special characters. They will not be displayed and it prevents potential outbound call issues.
- Do NOT exceed 15 characters. Traditional canadian providers will not show more than 15 characters. We suggest shrinking or adapt the name.
- Spaces are allowed in a caller ID name but count as a characters. (do not exceed 15 chars. in total).
- SIP Domain: One of VoIP.ms multiple servers, you can choose the one closest to your location
- Password: The password you set for the account / sub account
- Transport: UDP or TCP.
- Click on the Use button
- Your Linphone should be ready to make calls
- To confirm that you have registered this softphone properly, you can make a call to the Echo test application (dial 4443).
Configuring Linphone with Encryption
If you decided to use SIP TLS - call encryption along with Linphone please follow these steps:
1. Make sure your Main account or sub-account has "Encrypted SIP Traffic" enabled.
Bear in mind, if this setting is enabled and your device sends UDP/TCP or RTP you will be rejected with error code 488.
Enable this setting for the Main Account at Main Menu>> Account settings>> Advanced tab.
For a sub-account enable it at Sub accounts>> Manage sub-accounts by clicking on the orange icon with a pen and finally click at "Advanced Options (Click here to display)".
2. Now that your account/sub-account has this setting enabled, your Linphone needs to send TLS and SRTP.
- Fill in the information according to your account.
- Append the port 5061 to the server. (E.g. atlanta1.voip.ms:5061)
- On the option Transport select TLS.
- Click on the menu that is on the top right corner and click on Preferences.
- Click on the tab Call and Chat and enable "SRTP".
