Telco AC-211

From VoIP.ms Wiki

[draft revision]

---

Revision as of 00:59, 17 June 2011

Configuration Details

Web Management

• Enter the IP in the address bar of your browser for the unit
• Enter the password for the unit and click Authencate

WAN Settings

• Go to WAN tab
• Select AutoConfiguration tab and uncheck "Enable Automatic Configuration"

SIP Settings

• Go to SIP tab
• Primary Server: Enter the following.
  • Enter the server name. Example: houston.voip.ms
  • Port 5060
  • Domain Name: voip.ms
  • Check "Send Registration Request"
  • Dial Plan: (>#|[2-9]xxxxxxxxx|1[2-9]xxxxxxxxx|0|[489]11|*9[7-8]|*75xx)
    • The dial plan supports 10 & 11 digit dialing. When modifying the dialing plan >#| is required, though I don't know why
  • Transport: UDP
  • User/Phone Num: Your SIP Username
  • CallerID Name: Enter the CID you want to send
  • Port*: 5060
  • AEC On: On
  • Authentication User Name: Your SIP Username
  • Password: SIP Password
  • Click Save SIP Settings

CODECS

• Go to CODECS tab
• Force preferred CODEC Line 1: Set your preferred CODEC, recommended is G711U
  • The CODEC set must be enabled in your account: Account Settings -> Advanced
• Click Save CODEC Configuration

Miscellaneous

• Go to Miscellaneous tab
• Enter an NTP server
  • Free NTP Servers available at http://www.pool.ntp.org/en/
  • Click Save Settings

Reset

• Click the Reset button to reboot the gateway