Cisco IP Phone 7940/7960

From VoIP.ms Wiki

[quality revision]

[draft revision]

Revision as of 13:58, 25 April 2011 (view source) Andrew (Talk | contribs) (→Configuration Details) ← Older edit		Revision as of 21:39, 18 May 2011 (view source) Angelmiramon (Talk | contribs) (→Configuration Details) Newer edit →
Line 27:		Line 27:
	* Press '''Back''' and then '''Save''' to apply changes.		* Press '''Back''' and then '''Save''' to apply changes.
		+
		+
		+	***As an additional recommendation, Set "NAT enabled" to Yes, and on the "NAT address" parameter, enter the IP address of Router or firewall if, any.

---

Revision as of 21:39, 18 May 2011

Configuration Details

1. Press **# to unlock the Configuration Protection

2. Press Settings button

3. Go to "Network Configuration" to set the IP connectivity

4. Go to SIP Configuration

5. Select Line 1

• In Name and Authentication Name enter your VoIP.ms username(e.g. 100000)

• Enter your VoIP.ms password

• Enter atlanta.voip.ms as Proxy Address

• Configure Preferred Codec to g729a

• Press Back and then Save to apply changes.

• • • As an additional recommendation, Set "NAT enabled" to Yes, and on the "NAT address" parameter, enter the IP address of Router or firewall if, any.