Cisco SPA2102 Phone Adapter with Router
From VoIP.ms Wiki
| [draft revision] | [draft revision] |
| Line 6: | Line 6: | ||
'''Step 1''' | '''Step 1''' | ||
| - | + | *Power off your network devices, including your modem and PC. | |
| + | *Connect an Ethernet Cable from the Ethernet port of the SPA to the Ethernet port of the PC. | ||
| + | *Connect an Ethernet Cable from the Internet port of the SPA to the LAN/Ethernet port of the Modem. | ||
| + | *Then power up modem, then the SPA2102 and then the PC. | ||
| + | *Launch a web browser from the PC and enter "http://192.168.0.1/advanced" in the URL address bar field. | ||
| - | + | After these steps you should now have access to the Web Interface page of the SPA2102 to start with the initial configuration. | |
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| + | NOTE: If this is not working or the Browser can't find the page, you may also need to enable the Administration web service. | ||
'''Dial 7932#, then when prompted press 1 to enable and 1 to confirm'''<br> | '''Dial 7932#, then when prompted press 1 to enable and 1 to confirm'''<br> | ||
'''Step 2''' | '''Step 2''' | ||
| - | |||
| - | |||
| - | |||
| - | |||
| - | |||
| - | |||
| - | |||
You should now see the web interface of your Linksys/Sipura. | You should now see the web interface of your Linksys/Sipura. | ||
Revision as of 17:44, 4 April 2012
Configuration Details
Step 1
- Power off your network devices, including your modem and PC.
- Connect an Ethernet Cable from the Ethernet port of the SPA to the Ethernet port of the PC.
- Connect an Ethernet Cable from the Internet port of the SPA to the LAN/Ethernet port of the Modem.
- Then power up modem, then the SPA2102 and then the PC.
- Launch a web browser from the PC and enter "http://192.168.0.1/advanced" in the URL address bar field.
After these steps you should now have access to the Web Interface page of the SPA2102 to start with the initial configuration.
NOTE: If this is not working or the Browser can't find the page, you may also need to enable the Administration web service.
Dial 7932#, then when prompted press 1 to enable and 1 to confirm
Step 2
You should now see the web interface of your Linksys/Sipura.
click on the link "Admin", and once the page has reloaded, click again on the link "Advanced View".
Step 4
Under the LINE 1 Tab, Find the following fields and fill them with the following information
Nat Keep Alive: Yes
Nat Mapping/Traversal: Yes
Proxy: atlanta.voip.ms (You can choose any of our multiple VoIP.ms servers)
Register Expires: 180
Proxy Fallback Intvl: 180
Display Name: John Smith (Replace with your name or company name)
User ID: 100000 (Replace with your VoIP.ms username)
Password: ******** (Type in the account password)
Use DNS SRV: NO
DNS SRV Auto Prefix: NO
Step 5 (Optional)
Optionally, you can configure your adapter with a better dial plan, allowing faster dialing of 10 digits number (Local US/Canada) and also enable 7 digits dialing in one area code of your choice.
At the bottom of Line 1 TAB, you will find a field called Dial Plan
Replace the 555 digits in the following line by the area code of your choice and copy the line, including parenthesis, in the Dialplan field in Line 1 Tab at the bottom of the page:
(911S0|310xxxx|<:1555>[2-9]xxxxxx|1[2-9]xx[2-9]xxxxxxS0|[2-9]xx[2-9]xxxxxxS0|*xx|*xx.|[3468]11|822|0|00|[2-9]xxxxxx|4xxx|**275x.|xxxxxxxxxxxx.)
Step 6
Click on the "Save Settings " button at the bottom of the form.
How to avoid the long delay to hear the ringtone
If you ever experience some delay to hear the ringtone when you make outgoing calls with your SPA. Changing the SPA's Interdigit Long Timer value can help resolve the issue. Follow the next steps in order to change that setting:
Note: However before changing that option, test if calling the number with an # at the end of the number works(e.g. 5554441234#).
If that doesn't work you need to contact the support staff in voip.ms.
- 1- First access the SPA's web interface.
- 2- Click on the Admin Login and then click on the Voice tab.
- 3- Click on the Regional tab and look for the Control Timer Values (sec) section.
- 4- Enter the desire value in the Interdigit Long Timer field (for example lower this value to 4).
Note: The image correspond to the PAP2 device. If your device doesn't have this setting, contact voip.ms support.
Additionally, whenever the registration is dropped and its having problems to gain it back, you can try this simple trick:
On Advanced view, go to the Line tab, look for the SIP port setting, and change it to another, i.e. if you have port 5060 change to 5080, if it is 5061 you can change to 5081.
