Zycoo ZP502 - VoIP.ms Wiki

Check out our YouTube channel to watch our simple tutorials that will help you set up most of our features.

Zycoo ZP502

From VoIP.ms Wiki

(Difference between revisions)
Jump to: navigation, search
[draft revision][draft revision]
Line 23: Line 23:
[[File:ZP502SIP.JPG|Zycoo ZP502 Configuration Screen]]
[[File:ZP502SIP.JPG|Zycoo ZP502 Configuration Screen]]
 +
First you need to select the SIP line you will use, then you can set the following information on
First you need to select the SIP line you will use, then you can set the following information on
Line 29: Line 30:
'''Server Address''': houston.voip.ms( or IP address of any of our servers )
'''Server Address''': houston.voip.ms( or IP address of any of our servers )
 +
'''Server Port''': 5060 ( if this is blocked on your side, you can try with port 5080 )
'''Server Port''': 5060 ( if this is blocked on your side, you can try with port 5080 )
 +
'''Account Name''': 1XXXXX or 1XXXXX_X ( here you need to enter your main account or a sub account )
'''Account Name''': 1XXXXX or 1XXXXX_X ( here you need to enter your main account or a sub account )
 +
'''Password''' : your account or sub account password
'''Password''' : your account or sub account password
 +
'''Phone Number''': 1XXXXX or 1XXXXX_X ( here you need to enter your main account or a sub account )
'''Phone Number''': 1XXXXX or 1XXXXX_X ( here you need to enter your main account or a sub account )
 +
'''Enable Register''': Mark this box
'''Enable Register''': Mark this box
 +
'''ADVANCED SIP SETTING'''
'''ADVANCED SIP SETTING'''
'''Register expire time''': 180
'''Register expire time''': 180
-
'''NAT keep Alive interval''': 60
 
-
'''Local Port''': 5060 ( if this is blocked on your side, you can try with port 5080 )
 
-
'''NAT Keep Alive''': Mark this box
 
-
'''Transport Protocol''': UDP
 
-
Finally, you need to click on button "APPLY" to save these changes.
+
'''NAT keep Alive interval''': 180
-
'''Step 3 (OPTIONAL)'''
+
'''Local Port''': 5060 ( if this is blocked on your side, you can try with port 5080 )
-
First you need to select the SIP line you will use, then you can set the following information on, there you can see a screen like this:
+
'''NAT Keep Alive''': Mark this box
-
[[File:ZP502SIP.JPG|Zycoo ZP502 Configuration Screen]]
 
-
 
-
 
-
 
-
'''BASIC SETTING'''
 
-
 
-
'''Server Address''': houston.voip.ms( or IP address of any of our servers )
 
-
'''Server Port''': 5060 ( if this is blocked on your side, you can try with port 5080 )
 
-
'''Account Name''': 1XXXXX or 1XXXXX_X ( here you need to enter your main account or a sub account )
 
-
'''Password''' : your account or sub account password
 
-
'''Phone Number''': 1XXXXX or 1XXXXX_X ( here you need to enter your main account or a sub account )
 
-
'''Enable Register''': Mark this box
 
-
 
-
'''ADVANCED SIP SETTING'''
 
-
 
-
'''Register expire time''': 180
 
-
'''NAT keep Alive interval''': 60
 
-
'''Local Port''': 5060 ( if this is blocked on your side, you can try with port 5080 )
 
-
'''NAT Keep Alive''': Mark this box
 
'''Transport Protocol''': UDP
'''Transport Protocol''': UDP
Line 73: Line 57:
 +
'''Step 3 (OPTIONAL)'''
 +
In case you want to use IAX2 protocol, once you select IAX2 Tab you can see a screen like this:
 +
[[File:ZP502IAX.JPG|Zycoo ZP502 Configuration Screen]]
 +
There you can set the following information
-
 
+
Finally, you need to click on button "APPLY" to save these changes.
-
 
+
-
 
+
-
 
+
-
'''Under the LINE 1 Tab, Find the following fields and fill them with the following information'''
+
-
 
+
-
'''Proxy:''' atlanta.voip.ms (one of our multiple servers)<br>
+
-
'''Display Name:''' John Smith (your name or company name)<br>
+
-
'''User ID:''' 100000 (your VoIP.ms username)<br>
+
-
'''Password:''' ******** (the account password)<br>
+
-
'''Register Expires:''' 180<br>
+
-
'''Proxy Fallback Intvl:''' 180<br>
+
-
'''Nat Keep Alive:''' Yes<br>
+
-
'''Nat Mapping/Traversal:''' Yes
+
-
 
+
-
 
+
-
 
+
-
 
+
-
'''Step 3'''
+
-
 
+
-
[[File:ZP502IAX.JPG|PAP2T Configuration Screen|frame|left]]
+
-
 
+
-
 
+
-
 
+
-
'''Under the LINE 1 Tab, Find the following fields and fill them with the following information'''
+
-
 
+
-
'''Proxy:''' atlanta.voip.ms (one of our multiple servers)<br>
+
-
'''Display Name:''' John Smith (your name or company name)<br>
+
-
'''User ID:''' 100000 (your VoIP.ms username)<br>
+
-
'''Password:''' ******** (the account password)<br>
+
-
'''Register Expires:''' 180<br>
+
-
'''Proxy Fallback Intvl:''' 180<br>
+
-
'''Nat Keep Alive:''' Yes<br>
+
-
'''Nat Mapping/Traversal:''' Yes
+

Revision as of 15:33, 15 June 2011

Zycoo ZP502

Configuration Details

Step 1

Once you confirm this phone is connected to your network, from your PC ( which should be connected to the network too ), enter the IP address of the wan port in this phone as the URL (e.g. http://xxx.xxx.xxx.xxx/ or http://xxx.xxx.xxx.xxx:xxxx/). If you do not know the IP address, you can look it up on the phone’s display by pressing navigation "down" button.

In the login page you will need to enter the username and password:

1. Default user with general level -> username：guest / password：guest

2. Default user with root level -> username：admin / password：admin 

 The default password of phone screen menu is 123. After you configure the ip phone, you need click save button in config under Maintenance 
 in the left catalog to save your configuration. Otherwise the phone will lose your modification after power off and on.


Step 2

Once you enter on the configuration portal of this device, please go to VOIP section, there you can see a screen like this:

Zycoo ZP502 Configuration Screen


First you need to select the SIP line you will use, then you can set the following information on

BASIC SETTING

Server Address: houston.voip.ms( or IP address of any of our servers )

Server Port: 5060 ( if this is blocked on your side, you can try with port 5080 )

Account Name: 1XXXXX or 1XXXXX_X ( here you need to enter your main account or a sub account )

Password : your account or sub account password

Phone Number: 1XXXXX or 1XXXXX_X ( here you need to enter your main account or a sub account )

Enable Register: Mark this box


ADVANCED SIP SETTING

Register expire time: 180

NAT keep Alive interval: 180

Local Port: 5060 ( if this is blocked on your side, you can try with port 5080 )

NAT Keep Alive: Mark this box

Transport Protocol: UDP

Finally, you need to click on button "APPLY" to save these changes.


Step 3 (OPTIONAL)

In case you want to use IAX2 protocol, once you select IAX2 Tab you can see a screen like this:

Zycoo ZP502 Configuration Screen


There you can set the following information


Finally, you need to click on button "APPLY" to save these changes.

Retrieved from "https://wiki.voip.ms/article/Zycoo_ZP502"
Personal tools
Namespaces
Variants
Actions
VoIP.ms Wiki
Guides 🇨🇦
Guías 🇲🇽