Cisco IP Phone 7940/7960

From VoIP.ms Wiki

[quality revision]

[draft revision]

Revision as of 14:06, 24 May 2011 (view source) Alex.voip.ms (Talk | contribs) (→Configuration Details) ← Older edit		Revision as of 16:12, 5 October 2011 (view source) Albert (Talk | contribs) Newer edit →
Line 23:		Line 23:
	* Enter atlanta.voip.ms as '''Proxy Address'''		* Enter atlanta.voip.ms as '''Proxy Address'''
-	* Configure '''Preferred Codec''' to g729a	+	* Configure '''Preferred Codec''' to g711u
	* Press '''Back''' and then '''Save''' to apply changes.		* Press '''Back''' and then '''Save''' to apply changes.

---

Revision as of 16:12, 5 October 2011

Configuration Details

1. Press **# to unlock the Configuration Protection (some versions can also be unlocked pressing the "settings" button, scroll all the way to the bottom to the "unlock phone" option and then press the "select" softkey).

2. Press Settings button

3. Go to "Network Configuration" to set the IP connectivity

4. Go to SIP Configuration

5. Select Line 1

• In Name and Authentication Name enter your VoIP.ms username(e.g. 100000)

• Enter your VoIP.ms password

• Enter atlanta.voip.ms as Proxy Address

• Configure Preferred Codec to g711u

• Press Back and then Save to apply changes.

As an additional recommendation, Set "NAT enabled" to Yes, and on the "NAT address" parameter, enter the IP address of Router or firewall if, any.