Linphone

From VoIP.ms Wiki

[draft revision]

[draft revision]

Revision as of 17:39, 30 June 2022 (view source) Fred (Talk | contribs) ← Older edit		Revision as of 21:15, 24 March 2024 (view source) Rrojo (Talk | contribs) (→Configuring Linphone with Encryption) Newer edit →
Line 36:		Line 36:
	== Configuring Linphone with Encryption ==		== Configuring Linphone with Encryption ==
		+
		+	If you decided to use '''SIP TLS - call encryption''' along with '''Linphone''' please follow these steps:
		+
		+	'''1.''' Make sure your Main account or sub-account has '''"Encrypted SIP Traffic"''' enabled.
		+
		+	Bear in mind, if this setting is enabled and your device sends '''UDP/TCP''' or '''RTP''' you will be rejected
		+	with error code 488.
		+
		+	Enable this setting for the Main Account at '''Main Menu>> Account settings>> Advanced tab'''.
		+
		+	[[File:Mainacc encryp.png|thumb|none|600px|Click to enlarge]]
		+
		+
		+	For a sub-account enable it at '''Sub accounts>> Manage sub-accounts''' by clicking on the orange icon with a pen and finally click at '''"Advanced Options (Click here to display)"'''.
		+
		+	[[File:Subacc encryp.png|thumb|none|600px|Click to enlarge]]
		+
		+
		+	'''2.''' Now that your account/sub-account has this setting enabled, your Linphone needs to send '''TLS''' and '''SRTP'''.
	[[File:Linphone_3.1.2.png]]		[[File:Linphone_3.1.2.png]]

---

Revision as of 21:15, 24 March 2024

Configuration Detail

• Start Linphone Softphone

• Click on the Assitant option.

• Select the option Use a SIP Account.

• Fill in the information according to your account
  • Username: Your Main account or sub account username (six digit number) E.G 123456 / 123456_XX (the underscore has to be used for sub-accounts)
  • Display Name: Your name or company name. (See the requirements below)
  • SIP Domain: One of VoIP.ms multiple servers, you can choose the one closest to your location
  • Password: The password you set for the account / sub account
  • Transport: UDP or TCP.

IMPORTANT for Display Name:
  - We suggest entering your outbound Caller ID Name must be in capital letters. This will appears more clearly/visible on some devices.
  - You must NOT use any special characters, they will not be displayed. 
  - Enter a max of 15 characters. Some of regular Canadian providers will not show more than 15 characters max. We suggest shrinking or adapt your caller ID. 
  - Spaces are allowed in a caller id name.

• Click on the Use button

• Your Linphone should be ready to make calls

• To confirm that you have registered this softphone properly, you can make a call to the Echo test application (dial 4443).

Configuring Linphone with Encryption

If you decided to use SIP TLS - call encryption along with Linphone please follow these steps:

1. Make sure your Main account or sub-account has "Encrypted SIP Traffic" enabled.

Bear in mind, if this setting is enabled and your device sends UDP/TCP or RTP you will be rejected 
with error code 488.

Enable this setting for the Main Account at Main Menu>> Account settings>> Advanced tab.

For a sub-account enable it at Sub accounts>> Manage sub-accounts by clicking on the orange icon with a pen and finally click at "Advanced Options (Click here to display)".

2. Now that your account/sub-account has this setting enabled, your Linphone needs to send TLS and SRTP.

• Fill in the information according to your account.
• Append the port 5061 to the server. (E.g. atlanta1.voip.ms:5061)
• On the option Transport select TLS.

• Click on the menu that is on the top right corner and click on Preferences.
• Click on the tab Call and Chat and enable "SRTP".