Linphone

From VoIP.ms Wiki

[quality revision]

[draft revision]

Revision as of 16:40, 3 March 2021 (view source) Scomtois (Talk | contribs) ← Older edit		Revision as of 17:57, 20 June 2022 (view source) Fred (Talk | contribs) Newer edit →
Line 13:		Line 13:
	* Fill in the information according to your account		* Fill in the information according to your account
-	** '''Username:''' 100000 (Your Main SIP User ID or Sub Account ID).	+	** '''Username:''' You Main account or sub account username (six digit number) E.G 123456 / 123456_XX (the underscore has to be used for sub-accounts)
	** '''Display Name:''' Your name or company name. '''(See the requirements below)'''		** '''Display Name:''' Your name or company name. '''(See the requirements below)'''
-	** '''SIP Domain:''' atlanta.voip.ms	+	** '''SIP Domain:''' One of VoIP.ms multiple [[Choosing Server#Choosing_a_Server | servers]], you can choose the one closest to your location
-	** '''Password:''' Your Main SIP password or Sub Account password.	+	** '''Password:''' The password you set for the account / sub account
	** '''Transport:''' UDP or TCP.		** '''Transport:''' UDP or TCP.
-	Note: atlanta.voip.ms can be replaced with any of the servers available with voip.ms.	+

---

Revision as of 17:57, 20 June 2022

Configuration Detail

• Start Linphone Softphone

• Click on the Assitant option.

• Select the option Use a SIP Account.

• Fill in the information according to your account
  • Username: You Main account or sub account username (six digit number) E.G 123456 / 123456_XX (the underscore has to be used for sub-accounts)
  • Display Name: Your name or company name. (See the requirements below)
  • SIP Domain: One of VoIP.ms multiple servers, you can choose the one closest to your location
  • Password: The password you set for the account / sub account
  • Transport: UDP or TCP.

IMPORTANT for Display Name:
  - We suggest entering your outbound Caller ID Name must be in capital letters. This will appears more clearly/visible on some devices.
  - You must NOT use any special characters, they will not be displayed. 
  - Enter a max of 15 characters. Some of regular Canadian providers will not show more than 15 characters max. We suggest shrinking or adapt your caller ID. 
  - Spaces are allowed in a caller id name.

• Click on the Use button

• Your Linphone should be ready to make calls

• To confirm that you have registered this softphone properly, you can make a call to the Echo test application (dial 4443).

Configuring Linphone with Encryption

• Fill in the information according to your account.
• Append the port 5061 to the server. (E.g. atlanta1.voip.ms:5061)
• On the option Transport select TLS.

• Click on the menu that is on the top right corner and click on Preferences.
• Click on the tab Call and Chat and enable "SRTP".