Auerswald COMpact 5010
From VoIP.ms Wiki
| [draft revision] | [quality revision] |
| (7 intermediate revisions not shown) | |||
| Line 5: | Line 5: | ||
==Configuration Details== | ==Configuration Details== | ||
| - | Step 1 | + | '''Step 1''' |
| - | Under Voice Over IP (VoIP) >> Providers, enter the following: | + | Under '''''Voice Over IP (VoIP) >> Providers''''', enter the following: |
| - | Domain: | + | '''Domain:''' london.voip.ms (Replace with the address of one of the multiple servers from VoIP.ms) |
| - | Registrar: | + | '''Registrar:''' london.voip.ms (Replace with the address of one of the multiple servers from VoIP.ms) |
| - | + | '''Port:''' 5060 | |
| - | + | '''Note:''' | |
| - | + | * The (internal) SIP port set by the box, each configuration for a provider has it's own port | |
| + | * The shown codec setting works only if G.711 and G.729 are selected in the portal, otherwise you have to select only these two codecs in the PBX configuration | ||
| + | * Format der eigenen Rufnummer (own number): With this setting, the PBX will send the correct caller ID. | ||
| - | |||
| - | + | [[File:Auerswald 5010 1.jpg|1000px]] | |
| - | |||
| - | Select the provider that you have entered on Step 1 (Voipms), then under Kind of Connection select PTMP Connection, finally click the button Configure. | + | '''Step 2''' |
| + | |||
| + | Under the next tab '''''Voice Over IP (VoIP) >> Accounts''''', enter the following: | ||
| + | |||
| + | Select the provider that you have entered on Step 1 (Voipms), then under Kind of Connection select PTMP Connection, finally click the button Configure. | ||
| + | |||
| + | [[File:Aureswald 5010 2.png|1000px]] | ||
Now on the following screen, set the following. | Now on the following screen, set the following. | ||
| - | Account Name: The name that was chosen in Setup Account 1 | + | '''Account Name:''' The name that was chosen in Setup Account 1 |
| - | Country Prefix: E.g. 001 for NAMP or 01141 for Switzerland | + | |
| - | Area code: 201 for New York | + | '''Country Prefix:''' E.g. 001 for NAMP or 01141 for Switzerland |
| - | Country: Technically the country that correspondence with the country prefix, however there is a back in this version of the firmware and only "Germany" can be chosen. It does not have any effect on the functionality | + | |
| - | Exchange line access number (account number): The internal number in the PBX for this account. Can be used to dial-out directly and override the set up for external line preference | + | '''Area code:''' 201 for New York |
| - | User name: | + | |
| - | Password: | + | '''Country:''' Technically the country that correspondence with the country prefix, however there is a back in this version of the firmware and only "Germany" can be chosen. It does not have any effect on the functionality |
| - | Authorization ID: Can be left blank | + | |
| - | Multiple subscriber numbers (MSNs): The phone number(s) chosen/assigned by VoIP.ms | + | '''Exchange line access number (account number)''': The internal number in the PBX for this account. Can be used to dial-out directly and override the set up for external line preference |
| - | Display name: Assign a unique display name (16 characters max.) for the MSN | + | |
| - | Ringer rhythm: Optionally, you can select the ringer rhythm that should be used for the MS | + | '''User name:''' 100000 (your VoIP.ms username) |
| + | |||
| + | '''Password:''' ********* (account password) | ||
| + | |||
| + | '''Authorization ID:''' Can be left blank | ||
| + | |||
| + | '''Multiple subscriber numbers (MSNs):''' The phone number(s) chosen/assigned by VoIP.ms | ||
| + | |||
| + | '''Display name:''' Assign a unique display name (16 characters max.) for the MSN | ||
| + | |||
| + | '''Ringer rhythm:''' Optionally, you can select the ringer rhythm that should be used for the MS | ||
| + | |||
| + | [[File:Aureswald 5010 3.png|1000px]] | ||
| + | |||
| + | ==Guide Links== | ||
| + | In the event where you need the guides directly from Auerswald, you may find the user and admin manual guides below: | ||
| + | |||
| + | User Manual : [http://www.auerswald-root.de/download/datei/handbuch/eng/COMpV-Basic2-Busi-Bedhb/ver100911/BBusiGB.pdf Download PDF] | ||
| + | |||
| + | Admin Manual : [http://www.auerswald-root.de/download/datei/handbuch/eng/COMpact50-VoIP/Konfigurationshandbuch/ver060811/KVoIPGB.pdf Download PDF] | ||
Latest revision as of 00:55, 5 September 2019
After you have logged in to your device configuration screen, please enter the following information.
Configuration Details
Step 1
Under Voice Over IP (VoIP) >> Providers, enter the following:
Domain: london.voip.ms (Replace with the address of one of the multiple servers from VoIP.ms)
Registrar: london.voip.ms (Replace with the address of one of the multiple servers from VoIP.ms)
Port: 5060
Note:
- The (internal) SIP port set by the box, each configuration for a provider has it's own port
- The shown codec setting works only if G.711 and G.729 are selected in the portal, otherwise you have to select only these two codecs in the PBX configuration
- Format der eigenen Rufnummer (own number): With this setting, the PBX will send the correct caller ID.
Step 2
Under the next tab Voice Over IP (VoIP) >> Accounts, enter the following:
Select the provider that you have entered on Step 1 (Voipms), then under Kind of Connection select PTMP Connection, finally click the button Configure.
Now on the following screen, set the following.
Account Name: The name that was chosen in Setup Account 1
Country Prefix: E.g. 001 for NAMP or 01141 for Switzerland
Area code: 201 for New York
Country: Technically the country that correspondence with the country prefix, however there is a back in this version of the firmware and only "Germany" can be chosen. It does not have any effect on the functionality
Exchange line access number (account number): The internal number in the PBX for this account. Can be used to dial-out directly and override the set up for external line preference
User name: 100000 (your VoIP.ms username)
Password: ********* (account password)
Authorization ID: Can be left blank
Multiple subscriber numbers (MSNs): The phone number(s) chosen/assigned by VoIP.ms
Display name: Assign a unique display name (16 characters max.) for the MSN
Ringer rhythm: Optionally, you can select the ringer rhythm that should be used for the MS
Guide Links
In the event where you need the guides directly from Auerswald, you may find the user and admin manual guides below:
User Manual : Download PDF
Admin Manual : Download PDF
