Yeastar P-Series - Wiki

Yeastar P-Series

From Wiki

Jump to: navigation, search

Designed for SMBs, Yeastar P-Series VoIP PBX and Yeastar Cloud PBX deliver enterprise-grade communications features along with advanced UC capabilities, bringing a solid, reliable and affordable on-premises and hosted business voice solution.


Configuring your PBX

Assuming that your account is active and your DID has been chosen, you may follow the steps below:

1) Go to Settings > PBX > Trunks, click Add.
Yeastar1 pseries.png
2) In the new window, select Canada/United States from the Select Country drop-down list, select from the ITSP menu and follow the information below:
  • Name: Give this SIP trunk a name to help you identify it.
  • Protocol: SIP
  • Trunk Type: Register Trunk.
  • Transport: UDP
  • Username: Your account username.
  • Authentication Name: Same as the username.
  • From User: Same as the username.
  • Password: Your Account password.
  • Caller ID Number: Your Account DID number.
Yeastar2 pseries.png
3) Click Save and Apply. Go to PBX Monitor to check if the SIP trunk is connected successfully as the screenshot below shows.
Yeastar3 pseries.png
4) Set the registration time to 300 by going into Settings > PBX > General > SIP > General and adjust the Default Registration Time to 300.

Set up Outgoing Calls

1) To make outbound calls via the newly created SIP trunk, you need to configure an outbound route for the trunk. Go to Settings > PBX > Call Control > Outbound Routes, click Add.
Yeastar4 pseries.png
2) The system compares the number with the pattern that you have defined in your route 1. If it matches, it will initiate the call using the selected trunks. If it does not, it will compare the number with the pattern you have defined in route 2 and so on. The outbound route which is in a higher position will be matched firstly.
  • Route Name: Give this outbound route a name to help you identify it.
  • Dial Patterns: Set the dial patterns. As the settings below, to make calls via the SIP trunk, you need to precede the number to be dialed with the prefix 8.
  • Dial Pattern: 8
  • Strip: 1
  • Member Extensions: Select the extensions that are allowed to make calls through the outbound route.
  • Member Trunks: Select the trunk.
Yeastar5 pseries.png
3) Now you can make outbound calls through the trunk. As the dial patterns configured above, you need to dial “8” before the destination number. For example, to call the number “101234567”, you need to dial “8101234567” on your phone.

Set up Incoming Calls

1) To specify how calls from the trunk should be routed, you need to configure an inbound route for the SIP trunk. Go to Settings > PBX > Call Control > Inbound Routes, click Add.
Yeastar6 pseries.png
2) Configure the Inbound Route.
  • Name: Give this inbound route a name to help you identify it.
  • Member Trunks: Choose the trunk.
  • Destination: Select the destination where the incoming calls will be routed.
Yeastar7 pseries.png
3) Click Save and Apply. When you call in the SIP trunk, the call will be routed to the destination configured on the inbound route.

Guide links

In the event where you need the guides directly from Yeastar, you may find the admin guides below:

Admin Guide for Yeastar Cloud PBX : Yeastar Admin Guide

Admin Guide for Yeastar P-Series VoIP PBX : Yeastar Admin Guide

Personal tools
Actions Wiki Blog
Guides (English)
Guides (Français)
Guías (Español)