Wildix
From VoIP.ms Wiki
Wildix Unified Communications & Collaboration solution ensures the best user experience by providing you with one single web interface to manage internal & external communication across multiple channels
Contents |
Configuration
Once within your Wildix user interface, head into WMS > Trunks > Trunks and click on “+” under “SIP” table. You will now be able to start configuring your trunk to register with VoIP.ms
Basic Settings
In order to register your trunk, you will need to fill different fields with the corresponding information. Here is the list of settings required to fill:
| Basic settings | |
|---|---|
| Title | VOIP.ms |
| Trunk name | VOIP.ms |
| Auth login | 6 digits username or sub account |
| Password | password related to your main account or
sub account |
| Address or host name | select one of our available servers |
| Enable registration | Yes |
Advanced Settings
Even though your trunk will be registered, there are some settings that are worth modifying in order to have your calls s well as your trunk run as smoothly as possible. Here are the list of additional settings that you can configure:
| Advanced settings | |
|---|---|
| Audio codecs | G711u |
| T38 | Yes |
| CID header | P-Preferred-Identity |
| Session timer | yes |
| Registration Expiry (Sec) | 180 |
| UDP/TCP/TLS | UDP |
| DTMF mode | RFC2833 |
Whitelisting VoIP.ms IPs in 3CX
With Wildix, it is quite easy. Simply proceed into your PBX, head into WMS, Settings, PBX, Security and then CORS. From there, you can whitelist VoIP.ms points of presence IPs.
For more information on the IPs related to our servers, click here
For more information on the Wildix setting, click here
Note: You can enter IP addresses or domain names.
