VitalPBX
From VoIP.ms Wiki
This article will provide you guidance on configuring your VitalPBX.
Please note that this is a basic guide, and only covers how to connect the trunk with our servers, configure your outgoing and incoming calls.
Contents |
Configuring PJSIP using User and Password Authentication
Head into your PBX and create a trunk with the following parameters:
- Profile: Optional. Can be set to the “Default PJSIP Profile” for adding NAT
configurations and other settings.
- Codecs: ulaw, alaw, g729
- Trunk CID: We can set as the CID number one of the DID(s) acquired on the VoIP.ms portal.
- Overwrite CID: Can be set to “If not provided” in order to allow external incoming caller ID during call forwards.
- Local User: This is the name of your trunk. It can be anything of your liking.
- Contacts: SIP URI with one of the multiple servers from VoIP.ms; You can choose one closer to your location.
- Match: Set one of the multiple servers from VoIP.ms. The “DID POP” must be the same server configured in this field.
- Remote Username: Main SIP username
- Remote Secret: Same password that you use for login into the portal.
- Require Registration: Must be set to “Yes”
- Permanent Auth Rejection: Must be set to “Yes”
Configuring PJSIP using IP Authentication
In case you would like to use IP authentication instead of a User and Password, here, we will show you how to do it. Remember, to be able to use IP authentication you will need to create a sub-account. The main account is not capable of handling this type of authentication.
This will be the required configuration:
- Profile: Optional. Can be set to the “Default PJSIP Profile” for adding NAT configurations and other settings.
- Codecs: ulaw, alaw, g729
- Trunk CID: We can set as the CID number one of the DID(s) acquired on the VoIP.ms portal
- Overwrite CID: Can be set to “If not provided” in order to allow external
incoming caller ID during call forwards.
- Local User: The name of your trunk. This can be anything of your liking.
- Contacts: SIP URI with one of the multiple servers from VoIP.ms; You can choose one closer to your location.
- Match: Set one of the multiple servers from VoIP.ms. The “DID POP” must be the same server configured in this field.
- Require Registration: Must be set to “No”
- Permanent Auth Rejection: Must be set to “No”
Configuring Outbound Routes on VitalPBX
In order to place calls, we will need to create an outbound route pointing to the trunk that we’ve created previously. In this case, we will use the main trunk from VoIP.ms.
This will be the outbound route configuration to allow national and international phone calls.
You can also configure the pattern “4443” to perform a sound quality test, and the pattern “4747” to perform a DTMF test.
Configuring Inbound Routes on VitalPBX
For receiving calls, the only thing we need to do is to create an Inbound Route with the number we have purchased previously, just as shown in the following screenshot.
