Vodia PBX

From VoIP.ms Wiki

Vodia PBX by Vodia Networks

Vodia PBX is a software-based, open standards IP PBX that offers complete UC functionality right out of the box. Vodia makes installation, management, and maintenance of your PBX so easy that you can effortlessly manage it yourself, whether on an appliance, on your servers or in your cloud account.

Contents 1 System Prerequisite 2 Setting up Voip.ms 3 Configuring the Trunk on the Vodia PBX 4 Vodia Trunk settings

System Prerequisite

Before configuring the SIP trunk (in your Vodia system) it is required to go through the following checklist and make changes where necessary:

⦁ NAT (when used) created to Vodia PBX

           https://doc.vodia.com/admin_sip_and_audio

⦁ Firewall Checker passed

           https://doc.vodia.com/server_behind_nat

Setting up Voip.ms

Account Settings

The first thing is adjusting the Device type. To do so please navigate to Main Menu → Account settings → Inbound Settings, make sure that the Protocol for Inbound DIDs is set to SIP and that the Device type is set to IP PBX Server. Apply any changes made.

Next, we are going to set our dialing mode under General setting, Choose American Numbering Plan Administration (NANPA) and apply the changes.

DID Management

Make sure that the DIDs ordered are linked to your account. To do so navigate to DID Numbers → Manage DIDs. Click on the Edit DID icon and make sure that the routing points to SIP/IAX on your Main account.

Take note of the server selected to be the Point of Presence of your DID. In this example, the server New York-1 (newyork.voip.ms) will be the one used for our configuration.

Configuring the Trunk on the Vodia PBX

The general instructions outlining how to add a new SIP Trunk to Vodia PBX can be found here: https://doc.vodia.com/trunk_create

To create a SIP trunk, navigate to your domain and choose VoIP Providers in the left-hand panel, then click the plus button to create a trunk. Choose other under the setting provider.

Fill the settings of your trunk with the following information

• Type of SIP is Registration
• Name: VoIP.ms
• Outbound Proxy address: The server your DIDs have set as their Point of Presence, example (newyork.voip.ms)
• User name: Your VoIP.ms SIP Username found under Main Menu → Account Information
• Password: VoIP.ms password found under Main Menu → Account Settings → Security

Press create to complete the configuration.

Vodia Trunk settings

We will need to change a few settings to complete the VoIP.ms trunk configuration. Click on your newly created trunk.

1. Under Display Name: add your DID number
2. Account: add your SIP user account
3. Domain name: add your registrar proxy, should be the proxy address found under Menu → Account Settings → Default DID Routing in your VoIP.ms account
4. Explicitly list address for inbound traffic: Enter the IPV4 of your registrar proxy, for example, you can ping newyork.voip.ms (72.251.239.196) or if you not sure, check which registrar server you have chosen under Menu → Account Settings → Default DID Routing