Vodia PBX

From VoIP.ms Wiki

Vodia PBX by Vodia Networks

Vodia PBX is a software-based, open standards IP PBX that offers complete UC functionality right out of the box. Vodia makes installation, management, and maintenance of your PBX so easy that you can effortlessly manage it yourself, whether on an appliance, on your servers or in your cloud account.

System Prerequisite

Before configuring the SIP trunk (in your Vodia system) it is required to go through the following checklist and make changes where necessary:

⦁ NAT (when used) created to Vodia PBX

           https://doc.vodia.com/admin_sip_and_audio

⦁ Firewall Checker passed

           https://doc.vodia.com/server_behind_nat

Setting up Voip.ms

Account Settings

The first thing is adjusting the Device type. To do so please navigate to Main Menu → Account settings → Inbound Settings, make sure that the Protocol for Inbound DIDs is set to SIP and that the Device type is set to IP PBX Server. Apply any changes made.

Next, we are going to set our dialing mode under General setting, Choose American Numbering Plan Administration (NANPA) and apply the changes.

DID Management

Make sure that the DIDs ordered are linked to your account. To do so navigate to DID Numbers → Manage DIDs. Click on the Edit DID icon and make sure that the routing points to SIP/IAX on your Main account.

Take note of the server selected to be the Point of Presence of your DID. In this example, the server New York-1 (newyork.voip.ms) will be the one used for our configuration.

Configuring the Trunk on the Vodia PBX

The general instructions outlining how to add a new SIP Trunk to Vodia PBX can be found here: https://doc.vodia.com/trunk_create
To create a SIP trunk, navigate to your domain and choose VoIP Providers in the left-hand panel, then click the plus button to create a trunk. Choose other under the setting provider.