TalkSwitch

From VoIP.ms Wiki

Configuring TalkSwitch for VoIP.ms VoIP Service

This guide will show you how to set up VoIP.ms VoIP service.

When you start an account with VoIP.ms, we will provide you with account credentials information. Use this information to set up the service provider profile and VoIP numbers on your TalkSwitch system.

Setting up a service provider profile

1. Select the VoIP Configuration page.

2. Select a Profile (SP 1 to SP 4) that you wish to assign for FortiCall.

3. Select the Activate Profile checkbox.

4. Under Service Provider select Manual Setup.

5. Click the Update Configuration button. The essential settings will be completed automatically.

Disable public IP address substitution leave this unchecked. Check Register with authentication username. Check Enable NAT Keep alives (You can keep the default NAT settings) Codec Options: Here make sure to select only the codec supported for VoIP.ms (g.729 and g.711u). And if you have enough bandwidht you should select the g.711u as Preferred codec.

Provisioning Details

• Proxy Server name: server.voip.ms (one of the voip.ms servers, e.g. atlanta.voip.ms)
• Registrar server name: same as above
• Outbound proxy: same as above
• Realm/domain: same as above