Talk:Cisco Linksys SPA942 NA

From VoIP.ms Wiki

This phone (and a few other Cisco office-style 'phones, like the SPA303) has a [setup] key (icon of an 8.5x11" page with a corner folded down) so pressing [setup] and going to "network" in the menus should provide the IP address of this device. The ****110# code is normally used only when dealing with a device with no LCD or no setup button (for instance, an analogue telephone adapter à la PAP2, SPA2100 et al.); it's not needed if the IP address is in the setup menu, no idea if it's supported but I've never used it on these 'phones. --Carlb 22:41, 20 January 2012 (EST)