From VoIP.ms Wiki

Contents 1 Add a SIP Server 2 Add an user SIP Account 3 Adding a device 4 Creating a commin config

Add a SIP Server

Go to "Account" on the left menu, then click on "Account", then on the upper tab, click on "SIP Server".

Click on the corner right [Add] button.

• Server Name: Enter a name per instance Montreal3
• Domain Name: Leave it empty.
• Primary Server: Leave it empty.
• Server Address: Enter your preferred pop server, eg: YourPreferredPoP.voip.ms
• Server Port: Enter 5060. Note that you can also use one of our alternative ports such as 5080 or 42872.
• Transport Protocol: Enter UDP. Note that you can use TCP or if you want to use call encryption use TLS (Note you need to force the SRTP if you are using TLS and enble SIP Encryption on your sub-account)
• Proxy Server Address: Leave it empty.
• Proxy Server Port: Leave it empty.

Add an user SIP Account

Go to "Account" on the left menu, then click on "Account".

Click on the corner right [Add] button.

On this page be sure you have clicked on "More" to show all fields.

• Account Name: The name you would like to name this account
• Server Name: Choose one of the SIP Server you have created previously.
• User Number: Enter your VoIP.ms sub-account username ######_SubAccount
• Display Name*: Your outbound "CALLERID NAME", in Capital letters, Not longer than 15 characters, spaces are allowed
• User Authentication: Enter your VoIP.ms sub-account username ######_SubAccount
• Auth Password: Enter your sub-account password
• Proxy User: Leave it empty.
• Proxy Password: Leave it empty.
• Voice Message Number: Enter *97 (Star 97)

Adding a device

Go to "Device" on the left menu, and click on the corner right [Add] button.

• MAC Address: Enter the MAC address under the phone
• Device Name: Enter a device name (for your own reference and for searchability in the FDMCS plateforme)
• Model: The exact model number you wil find on the corner right under the phone on a black sticker.
• Site: Choose where you want to deploy this phone, if its on your main SITE or any other site you have created.
• Select a server: Select the SIP server you want to link this.
• Bind Account: Link the SIP account you have created.

Creating a commin config

Since all the device you will link on VoIP.ms wil need to have the same config. Its also possible to create individual config per IP Phone if you want to customise it,

Go to "Config" on the left menu, and "Common Config", then click on the corner right [Add] button.

• Config Name: Name it the way you want eg: "Global Config"
• Config Type: You can choose " By site" template to affect these config to all sites and sub sites
• Push Sites: Default
• Auto Config: Yes

Then click "OK"

Once done, where the template you have created, click on the "Gear" option.

On the left menu, click on "Line", then the upper tab "SIP", and find "Register Settings".

• Activate: Check the box and set the toggle to Yes.

Where SIP Server 1

• Registration Expiration: enter 60, for 60 seconds.

Now go to the section "Basic Settings" section.

• Voice Message Number: check the box and type "*97" (Star *97)

Now go to the section "Codecs Settings" section.

• Enabled Codecs: Check the box and choose "G722". (Be sure the codec G722 is enabled on your sub-account setting under Advanced settings)

Now go to the section "Advanced Settings" section.

• DNS Mode: Check the box and choose "DNS A".

Replicate these for all Line SIP1/2/etc..