Provisioning

From VoIP.ms Wiki

Article en Français	Artículo en Español
Français	Español

Automatic provisioning allows you to configure your IP phone and link it to one of your SIP accounts (Sub-accounts) without having to manually enter the necessary parameters in the phone's administration interface. The information needed for its configuration is automatically deployed via the provisioning server, which greatly facilitates the configuration and management process.

Note that VoIP.ms Provisioning Program is currently free of charge for a limited time only.

Contents 1 Supported Devices 2 Manage Locations 3 Add Device 4 Search / Filter 5 Disclaimer

Supported Devices

Currently, only the devices listed below are compatible. Over time, we will add more devices in the provisioning tool.

• Grandstream: GXP1610, GXP1620, GXP1625, GXP1628, GXP1782, GXP2100, GXP2140, GXP2170
• Snom: D120, D315, D345, D712, D717, D725, D735, D765, D785
• Polycom: VVX101, VVX250, VVX300, VVX301, VVX310, VVX350, VVX400, VVX411, VVX450, VVX501, VVX601

Manage Locations

The location management option will allow you to create multiple locations. (For example, Office A, Office B, Sales Dept, Help Desk L2, etc.) When you create a new device, you will have the ability to associate it with a location, which will allow you to search devices from a specific location.

A location can also be created when you add a new Device.

To create or edit a location, go to "Provisioning" under Main Menu Nav. Then click the "Manage Locations" button.

In the line of your existing locations, you can edit an existing location by clicking the yellow edit button or delete one by clicking on the red trash buttons.

To create a new location click on the Add Location + button.

A note needs to be given, then click on Save Location.

Add Device

To add a new device, you must provide information about it. To do so,"Provisioning" under Main Menu Nav. Then click on the "+ Add device" button.

Note: You must ensure that your device is supported (see supported devices section) and has the latest firmware update.

• Device Name: The name you wish to give your device.
• Location: Associate the device with a specific location (You can create or chose one of your existing Location).
• MAC Address*: Enter the MAC address of your device. This is usually found under the device or in the "Network Status" option.
• Brand*: Select the brand of your device.
• Model*: Select the model of your device.
• Account*: This is the sub-account you wish to associate with this phone.
• POP*: Select the POP server you want your device to be registered to. (Note that it must match your POP DID, to receive incoming calls)

Search / Filter

Disclaimer

VoIP.ms Provisioning Program is free of charge for a limited time only.