TalkSwitch

From VoIP.ms Wiki

Contents 1 Configuring TalkSwitch for VoIP.ms VoIP Service 2 Provisioning Details 3 Configuring a VoIP number with VoIP.ms 3.1 Phone Number

Configuring TalkSwitch for VoIP.ms VoIP Service

This guide will show you how to set up VoIP.ms VoIP service.

When you start an account with VoIP.ms, we will provide you with account credentials information. Use this information to set up the service provider profile and VoIP numbers on your TalkSwitch system.

Setting up a service provider profile

1. Select the VoIP Configuration page.

2. Select a Profile (SP 1 to SP 4) that you wish to assign for FortiCall.

3. Select the Activate Profile checkbox.

4. Under Service Provider select Manual Setup.

5. Click the Update Configuration button. The essential settings will be completed automatically.

Disable public IP address substitution leave this unchecked. Check Register with authentication username. Check Enable NAT Keep alives (You can keep the default NAT settings) Codec Options: Here make sure to select only the codec supported for VoIP.ms (g.729 and g.711u). And if you have enough bandwidht you should select the g.711u as Preferred codec.

Provisioning Details

• Proxy Server name: server.voip.ms (one of the voip.ms servers, e.g. atlanta.voip.ms)
• Registrar server name: same as above
• Outbound proxy: same as above
• Realm/domain: same as above

Configuring a VoIP number with VoIP.ms

Note: You don't need to purchase a DID number for outgoing calls. The VoIP number is used as your CallerID number.

• Select the VoIP Numbers page

• Select one of the empty voip number slots and then check the Activate VoIP number
• Select a VoIP profile: Here select the profile create for VoIP.ms

Before adding the numbers you will require to create one record for your main account sip userID as showed in the screen, this is required as this section sends the correct information required from our servers on the INVITES:FROM which will be the userid, if you don't add this record the Talkswitch will be sending the number (DID set) instead and this will result on continuous deregistration.

Phone Number

Here you can set the callerID number that you want (or your DID number if you want to receive incoming calls), you need to enter the number filling the 3 fields.

• Country Code: 1
• City or area code: 555
• Number: 4443322