Media5 Mediatrix C7 and 4100
From VoIP.ms Wiki
Contents |
Connecting the Mediatrix device to your network
The Mediatrix C7 and Mediatrix 4100 series have two Ethernet ports:
- ETH1 (or WAN in the 4102): connect the unit to your network through this port, it is set to get an IP address from a DHCP server.
- ETH2 (or LAN in the 4102): by default it has IP 192.168.0.10, this port can be used to directly manage the device.
If the Power LED is on, the device has an IP address, in such case:
- Connect a phone to one of the telephony ports and Dial: *#*0
- The system will playback the IP address the device has (Example: 192.168.1.2)
If the Power LED is blinking, the unit has not received an IP address.
- Check the network cable
- Check if the port in your network switch is active
- If the problem remains then use the second Ethernet port to directly connect your computer to the unit.
You can always refer to the following technical bulletin to correctly set the network configuration in your unit (external link to the Mediatrix documentation portal):
Connecting to the Mediatrix GUI for the first time
Using your favorite web browser from a computer on the same network, open the IP address the device got from the DHCP server.Example: http://192.168.1.2
- Default username: public
- Default passowrd: <Empty> (no password by default)
Configure your VoIP.ms credentials
- Go to the SIP menu
- Select the Servers sub-menu
- In the Registrar host field seize the registrar FQDN associated to your account. Example: server.voip.ms
- In the Proxy host field seize the proxy FQDN associated to your account. Example: server.voip.ms
- Click on the Apply button
- Click on the restart required services link at the top of the page
- Go to the Registrations sub-menu
- For each analog port to register seize the assigned VoIP.ms username in the Username: column
- In the Friendly Name: seize the name you want to present when placing calls (not mandatory)
- Select Enable in the associated Register drop-down menu
Note: Depending on the model and the number of lines, you may configure from 1 to 24 ports.
- Click on the Apply button
- Go to the Authentication sub-menu
- Click on the Edit All Entries button
- Set the Criteria to: Endpoint
- Endpoint: Select the endpoint to register from the dropdown list
- Set the Validate Realm to Disable
- Seize the VoIP.ms account/sub-account username in the Username field
- Seize the VoIP.ms account/sub-account password in the Password field
- Click on the Apply & Refresh Registration button
Optional Settings
- Step 6
Click the Telephony Menu
CODECS Sub Menu
Disable G.711 a-law for both Voice and Data
Next to G.729 click Edit and change the Voice priority to 10
Click Submit
- Step 7
To support User name with ‘’_’’
Click the Call Router menu
Sub-menu Auto-Routing
Change the Criteria Type to SIP Username
Click Apply Config
- Step 8
In order to be able to access the star numbers (e.g. *97 for voicemail), you need to add the proper DTMF map to the Mediatrix configuration.
To do so, click the Telephony menu and then the DTMF Maps sub-menu.
In the 2nd row of the table, type *xx in the DTMF Map column, and leave the Transformation column empty.
Click Submit
- Step 9
If your DHCP server does not provide an SNTP Server, you can configure it manually.
Click the Network Menu and then sub-menu Host
Change the SNTP Configuration Source to Static
Configure the SNTP Host to: time.nrc.ca or any other SNTP server.
Click Apply Config
At the end of the configuration, if you see the message Some changes require to restart Click on services table and restart all Required Services
