Asterisk PJSIP

From VoIP.ms Wiki

Contents 1 Asterisk (PJSIP) 1.1 pjsip.conf 1.2 extensions.conf 2 Asterisk IP Auth. (PJSIP) 2.1 pjsip.conf 2.2 extensions.conf

Asterisk (PJSIP)

pjsip.conf

[mycontext]
; Make sure to include inbound prior to outbound because the _NXXNXXXXXX handler will match the incoming call and create a loop
include => voipms-inbound
include => voipms-outbound

[voipms-outbound]
exten => _1NXXNXXXXXX,1,Dial(PJSIP/${EXTEN}@voipms)
exten => _1NXXNXXXXXX,n,Hangup()
exten => _NXXNXXXXXX,1,Dial(PJSIP/1${EXTEN}@voipms)
exten => _NXXNXXXXXX,n,Hangup()
exten => _011.,1,Dial(PJSIP/${EXTEN}@voipms)
exten => _011.,n,Hangup()
exten => _00.,1,Dial(PJSIP/${EXTEN}@voipms)
exten => _00.,n,Hangup()

; inbound context example for your DID numbers, do not add the number 1 in front

[voipms-inbound]
exten => 7863643011,1,Answer() ;your DID

extensions.conf

[mycontext]
; Make sure to include inbound prior to outbound because the _NXXNXXXXXX handler will match the incoming call and create a loop
include => voipms-inbound
include => voipms-outbound

[voipms-outbound]
exten => _1NXXNXXXXXX,1,Dial(PJSIP/${EXTEN}@voipms)
exten => _1NXXNXXXXXX,n,Hangup()
exten => _NXXNXXXXXX,1,Dial(PJSIP/1${EXTEN}@voipms)
exten => _NXXNXXXXXX,n,Hangup()
exten => _011.,1,Dial(PJSIP/${EXTEN}@voipms)
exten => _011.,n,Hangup()
exten => _00.,1,Dial(PJSIP/${EXTEN}@voipms)
exten => _00.,n,Hangup()

; inbound context example for your DID numbers, do not add the number 1 in front

[voipms-inbound]
exten => 7863643011,1,Answer() ;your DID

Asterisk IP Auth. (PJSIP)

pjsip.conf

Note: You'll need to create a sub account to use IP Auth

[voipms]
canreinvite=nonat
context=mycontext
host=atlanta.voip.ms (one of our multiple servers, you can choose the one closer to your location)
type=peer
disallow=all
allow=ulaw
; allow=g729 ; uncomment if you support g729
nat=yes

extensions.conf

[mycontext]
; Make sure to include inbound prior to outbound because the _NXXNXXXXXX handler will match the incoming call and create a loop
include => voipms-inbound
include => voipms-outbound

[voipms-outbound]
exten => _1NXXNXXXXXX,1,Dial(PJSIP/${EXTEN}@voipms)
exten => _1NXXNXXXXXX,n,Hangup()
exten => _NXXNXXXXXX,1,Dial(PJSIP/1${EXTEN}@voipms)
exten => _NXXNXXXXXX,n,Hangup()
exten => _011.,1,Dial(PJSIP/${EXTEN}@voipms)
exten => _011.,n,Hangup()
exten => _00.,1,Dial(PJSIP/${EXTEN}@voipms)
exten => _00.,n,Hangup()

; inbound context example for your DID numbers, do not add the number 1 in front

[voipms-inbound]
exten => 7863643011,1,Answer() ;your DID