Firewall
From VoIP.ms Wiki
Revision as of 16:31, 13 October 2014 by 90210chris (Talk | contribs)
Setup
When configuring your firewall to work with VoIP.ms, there are certain ports which need to be enabled to avoid quality and/or stability issues. Generally these ports are configured by default; however for users requiring the specific port numbers and protocols please use the information below:
SIP Ports
Port = 5060 *Port range = 5060 - 5080 Protocol = UDP or UDP/TCP Direction = Incoming and Outgoing
RTP Ports
The RTP port may vary by device. If configuring a firewall you will want to configure a range which includes the default RTP port in your device.
Port range = 10001-20000 UD Protocol = UDP or UDP/TCP Direction = Incoming and Outgoing
- This is for users who may require a port range for their firewall or router
If you still have questions on this topic please contact us for further assistance.
