User:Roy/Sandbox
From VoIP.ms Wiki
Contents |
Configuration Detail
In order to set up your new Audiocodes 420 HD IP phone you only need to get its IP address and access to your device's settings from your web browser.
Getting the IP address number
As soon as you have plugged your phone to your local router your phone will receive its own local IP address. You can get this number by following these steps:
1. Press the MENU key located on the device.
2. Go to option 5 "Device Status" and press OK button.
3. Choose option 1 "Network Settings" and press OK button.
4. Scroll down to "IP Address" and take note of this number.
Login into your device via Web Interface
From your PC, open your favorite web browser and at the URL bar, type the IP address you get from your device. A pop-up window will show up asking for your phone's login credentials.
Username: admin
Password: 1234
You will reach the main page of your Audiocodes 420 HD IP phone
Setting up your device with your SIP credentials
From the left panel click on the "Quick setup" folder and then at "Quick Setup" icon. Three sections will show up on the right panel, LAN Setup, SIP Proxy and Registrar and Line Settings.
1. At SIP Proxy and Registrar we can set:
Use SIP Proxy: Disable
Use SIP Registrar: Enable
Registrar IP Address or Host Name: Any of our servers. I.E. denver.voip.ms
Registrar Port: 5060
Note: Bear in mind to use the same VoIP server your VoIP number is using. You can check what VoIP server your VoIP number is using from your VoIP.ms customer portal at DID Numbers>> Manage DIDs and under POP column. You can choose any server as long as the one in your portal and the one in this field matches, otherwise, incoming calls won't ring.
2. At Line Settings we can set:
Line Number: 1
Line 1 Activate: Enable
Line 1 Display Name: Caller ID name field (Not guarantee so be sent)
Line 1 User ID: 100000 (your VoIP.ms main account number or sub-account name)
Line 1 Authentication User Name: 100000 (your VoIP.ms main account number or sub-account name)
Line 1 Authentication Password: ********* (account or sub-account password)
