Polycom VVX 300, 400, etc - VoIP.ms Wiki

Check out our YouTube channel to watch our simple tutorials that will help you set up most of our features.

Polycom VVX 300, 400, etc

From VoIP.ms Wiki

Revision as of 14:59, 1 February 2019 by AndrewR (Talk | contribs)
Jump to: navigation, search
Polycom VVX 300 Series

CONFIGURATION

1. Access the Web Configuration Utility

Connect the phone to a network with a DHCP server and wait for it to boot to the main interface. This typically takes about 1-2 minutes. Depending on the firmware version the phone has your IP may be displayed once it boots.
You can always access the current IP information by going to the following location in the menu:

 Home (Button) -> Settings -> Status -> Network -> TCP/IP Parameters

Retrieved from "https://wiki.voip.ms/article/Polycom_VVX_300,_400,_etc"
Namespaces
Variants
Actions
VoIP.ms Wiki
Guides 🇨🇦
Guías 🇲🇽