SNOM 320
From VoIP.ms Wiki
| [quality revision] | [quality revision] |
| Line 39: | Line 39: | ||
'''Also make sure your accounts/sub accounts does have the MWI active (Mailbox assigned)''' | '''Also make sure your accounts/sub accounts does have the MWI active (Mailbox assigned)''' | ||
[[category:SIP phones]] | [[category:SIP phones]] | ||
| + | |||
| + | == Outgoing call issues in firmware version 8 == | ||
| + | |||
| + | Since firmware version 8 the phone is sending additional information in the SIP header which can cause SIP packets to exceed the maximum size of an IP packet that can be transmitted without fragmentation. Some routers or DSL lines cannot handle such large packets which causes the call to fail. | ||
| + | |||
| + | Depending on the MTU size your network components can process, in some cases large packets are required to be fragmented. You can find more information on how to solve this on SNOM's official wiki here http://wiki.snom.com/FAQ/How_to_solve_problems_with_outgoing_calls_in_firmware_version_8%3F | ||
Revision as of 19:59, 18 April 2016
This article makes reference to the basic configuration for the SNOM 320 phone using a VoIP.ms account.
Contents |
Documentation:
Configuration:
The initial configuration is very simple, you will need to plug the SNOM 320 phone to the internet source (modem, router), this will assign the phone with a IP address.
- Launch the web browser on your computer
- Enter the IP Address in the address field in your preferred Web Browser, e.g. http://192.168.1.10
- Press the return key
You can find the SNOM's IP Address by using the menu display on the phone.
The default login details are: Username: admin, Password: admin.
The SNOM configuration page should appear.
From the menu screen click on Setup -> Identity/Line 1.
Make sure to use your own credentials such as:
Username/SIP UserID (your six digit VoIP.ms sip number, or the sub account that you wish to register) Password. Preferred Server (The VoIP.ms server of your choice)
Using the "Retrieve" Voice mail Key
In the 'Function Keys' page on the web-interface of your phone, select 'Speed Dial' as the type, in the 'Retrieve' row, 'Number' field, right next to the 'Type' field, enter *97
Also make sure your accounts/sub accounts does have the MWI active (Mailbox assigned)
Outgoing call issues in firmware version 8
Since firmware version 8 the phone is sending additional information in the SIP header which can cause SIP packets to exceed the maximum size of an IP packet that can be transmitted without fragmentation. Some routers or DSL lines cannot handle such large packets which causes the call to fail.
Depending on the MTU size your network components can process, in some cases large packets are required to be fragmented. You can find more information on how to solve this on SNOM's official wiki here http://wiki.snom.com/FAQ/How_to_solve_problems_with_outgoing_calls_in_firmware_version_8%3F
