TalkSwitch

From VoIP.ms Wiki

[draft revision]

[draft revision]

Revision as of 16:06, 28 August 2014 (view source) William (Talk | contribs) ← Older edit		Revision as of 16:18, 28 August 2014 (view source) William (Talk | contribs) Newer edit →
Line 31:		Line 31:
	*'''Outbound proxy''': same as above		*'''Outbound proxy''': same as above
	*'''Realm/domain''': same as above		*'''Realm/domain''': same as above
		+
		+	==Configuring a VoIP number with VoIP.ms==
		+	'''Note:''' You don't need to purchase a DID number for outgoing calls. The VoIP number is used as your CallerID number.
		+
		+	*Select the '''VoIP Numbers''' page
		+
		+	[[File:Voip number inbound (3).jpg|800px]]
		+
		+	*Select one of the empty voip number slots and then check the '''Activate VoIP number'''
		+	*'''Select a VoIP profile''': Here select the profile create for VoIP.ms
		+
		+	===Phone Number===
		+	Here you can set the callerID number that you want (or your DID number if you want to receive incoming calls), you need to enter the number filling the 3 fields.
		+	*'''Country Code''': 1
		+	*'''City or area code''': 555
		+	*'''Number''': 4443322

---

Revision as of 16:18, 28 August 2014

Contents 1 Configuring TalkSwitch for VoIP.ms VoIP Service 2 Provisioning Details 3 Configuring a VoIP number with VoIP.ms 3.1 Phone Number

Configuring TalkSwitch for VoIP.ms VoIP Service

This guide will show you how to set up VoIP.ms VoIP service.

When you start an account with VoIP.ms, we will provide you with account credentials information. Use this information to set up the service provider profile and VoIP numbers on your TalkSwitch system.

Setting up a service provider profile

1. Select the VoIP Configuration page.

2. Select a Profile (SP 1 to SP 4) that you wish to assign for FortiCall.

3. Select the Activate Profile checkbox.

4. Under Service Provider select Manual Setup.

5. Click the Update Configuration button. The essential settings will be completed automatically.

Disable public IP address substitution leave this unchecked. Check Register with authentication username. Check Enable NAT Keep alives (You can keep the default NAT settings) Codec Options: Here make sure to select only the codec supported for VoIP.ms (g.729 and g.711u). And if you have enough bandwidht you should select the g.711u as Preferred codec.

Provisioning Details

• Proxy Server name: server.voip.ms (one of the voip.ms servers, e.g. atlanta.voip.ms)
• Registrar server name: same as above
• Outbound proxy: same as above
• Realm/domain: same as above

Configuring a VoIP number with VoIP.ms

Note: You don't need to purchase a DID number for outgoing calls. The VoIP number is used as your CallerID number.

• Select the VoIP Numbers page

• Select one of the empty voip number slots and then check the Activate VoIP number
• Select a VoIP profile: Here select the profile create for VoIP.ms

Phone Number

Here you can set the callerID number that you want (or your DID number if you want to receive incoming calls), you need to enter the number filling the 3 fields.

• Country Code: 1
• City or area code: 555
• Number: 4443322