Polycom SoundStation IP 4000 Conference Phone

From VoIP.ms Wiki

[draft revision]

[draft revision]

Revision as of 19:41, 21 January 2012 (view source) Carlb (Talk | contribs) m (+cat) ← Older edit		Revision as of 15:30, 18 December 2013 (view source) Joseph.voip.ms (Talk | contribs) Newer edit →
Line 7:		Line 7:
	'''Get the IP'''		'''Get the IP'''
-	Start the Phone and it will get an IP from the DHCP Server, then it will display the IP on the Screen.	+	To obtain the IP address of your phone, press "Menu" followed by Status, Platform and Phone. The IP address is listed together with other phone information.
Line 29:		Line 29:
	* Click the '''Submit''' button to save your settings.		* Click the '''Submit''' button to save your settings.
	[[Category:SIP phones]]		[[Category:SIP phones]]
		+
		+	== '''Documentation:''' ==
		+	[http://supportdocs.polycom.com/PolycomService/support/global/documents/support/user/products/voice/soundstation_ip4000_user_guide_sip_2.0.x.pdf User's manual]

---

Revision as of 15:30, 18 December 2013

Configuration Details

Get the IP

To obtain the IP address of your phone, press "Menu" followed by Status, Platform and Phone. The IP address is listed together with other phone information.

Configure Settings

• Go to Lines tab and then to Line 1
• Change Settings according to your Account values

• Click the Submit button to save your settings.
• Go to General tab and then to Audio Processing
• Set your Codec to the following:

• Click the Submit button to save your settings.

Documentation:

User's manual