Atcom AG188N

From VoIP.ms Wiki

[checked revision]

[checked revision]

Revision as of 15:09, 31 May 2011 (view source) Andrew (Talk | contribs) (Created page with "==Configuration Details== '''Step 1''' The first step is to find out what IP Address your adapter is currently using. '''Step 2''' '''Using your favorite web browser from a...") ← Older edit		Revision as of 15:12, 31 May 2011 (view source) Andrew (Talk | contribs) (→Configuration Details) Newer edit →
Line 1:		Line 1:
	==Configuration Details==		==Configuration Details==
-	'''Step 1'''	+	'''SIP Configuration Section:'''
-		+
-	The first step is to find out what IP Address your adapter is currently using.	+
-		+
-		+
-		+
-	'''Step 2'''	+
-		+
-	'''Using your favorite web browser from a computer on the same network, point the address to the IP address of your adapter.'''<br>	+
-	<nowiki>(example http://192.168.1.2)</nowiki> Replace 192.168.1.2 by the IP Address your device is currently using.	+
-		+
-		+
-		+
-	'''Step 3'''	+
-		+
-	You should now see the web interface of your Atcom AG188N.	+
-		+
-		+
-		+
-	'''Step 4'''	+
	'''Find the following fields and fill them with the following information as bellow:'''		'''Find the following fields and fill them with the following information as bellow:'''
Line 37:		Line 18:
	'''SIP Default Protocol:''' Enabled<br>		'''SIP Default Protocol:''' Enabled<br>
-
-
-	'''Step 5'''
	Click on the "Apply" button at the bottom of the form.		Click on the "Apply" button at the bottom of the form.

---

Revision as of 15:12, 31 May 2011

Configuration Details

SIP Configuration Section:

Find the following fields and fill them with the following information as bellow:

Register Server Addr: atlanta.voip.ms (one of our multiple servers)
Register Server Port: 5060
Register Username: 100000 (your VoIP.ms username)
Register Password: ******** (the account password)
Detect Interval Time: 60
DTMF Mode: DTMF_RFC2833
Enable Via rport: Enabled
Local SIP Port: 5060
Register Expire Time: 60
RFC Protocol Edition: RFC3261
Server Type: common
SIP Default Protocol: Enabled

Click on the "Apply" button at the bottom of the form.

Configuration Screen