PhonerLite

From VoIP.ms Wiki

[draft revision]

[quality revision]

Revision as of 21:38, 19 July 2022 (view source) Fred (Talk | contribs) ← Older edit		Revision as of 00:50, 19 January 2024 (view source) RP (Talk | contribs) Newer edit →
Line 1:		Line 1:
-	==Configuration Details==	+	[[File:TSIP_logo.jpg|right|tSIP|200px]]
-	* Start PhonerLite
-	* Select Manual Configuration
-	[[File:Phonerlite-wiz1.png]]	+	PhonerLite is a clearly arranged application for Windows. PhonerLite enables your PC to use it for Internet telephony (VoIP, Voice overIP). Pre-conditions are a full-duplex sound card, a microphone and speakers (alternatively a headset), an Internet connection and an account from a provider supporting the protocol SIP. PhonerLite supports several SIP profiles, each configurable independently.
-	* '''Proxy/Registrar:''' One of VoIP.ms multiple [[Choosing Server#Choosing_a_Server | servers]], you can choose the one closest to your location
-	* '''Realm/Domain:''' Same as Proxy/Registrar
-	* Leave STUN blank
-	Click '''Next'''	+	'''You will find a step by step below on configuring PhonerLite with VoIP.ms'''
-	[[File:Phonerlite-wiz2.png]]
-	* '''Username:''' Your Main account or sub account username (six digit number) E.G 123456 / 123456_XX (the underscore has to be used for sub-accounts)
-	* '''Authentication Name:''' Same as Username
-	* '''Password:''' The password you set for the account / sub account
-	Click '''Next'''	+	==Configuration Details==
-	[[File:Phonerlite-wiz3.png]]	+	*1. Download PhonerLite at http://phonerlite.de/download_en.htm
		+	*2. Once downloaded, open and install it.
		+	*3. Once installed and opened, you will be greeted with the following window. Make sure to select ‘’’Manual Configuration’’ and fill the following fields:
		+	*A. Proxy/Registrar: Set the VoIP.ms server you wish to register to. For a list of servers available, click [[Choosing_Server#IPs| | here]]
		+	*B. Domain/Realm : Same server you’ve set in the previous field.
-	* Select your audio capture and playback devices	+	[[File:PhonerLite1.png|thumb|none|600px]]
-	* Click '''Next'''
-	[[File:Phonerlite-wiz4.png]]	+	*4. Press > and fill the next fields:
		+	*A. User Name: Set your 6-digit main account username or sub account.
		+	*B. Authentication Name: Same as previous field
		+	*C. Password: Set your main account or sub account password.
-	* Click '''Finish''' check box to save your profile	+	[[File:PhonerLite2.png|thumb|none|600px]]
-	* PhonerLite is now ready to make calls.
		+	*5. Press > and then the check mark. You are now registered and can proceed with making phone calls!
-	('''Optional fine tuning''')
-	Under '''''Server''''' you can change register time to voip.ms recommended 180 seconds.	+	[[File:PhonerLite4.png|thumb|none|600px]]
-	Under '''''Codecs''''' turn off silence detection.
-	If you use headset you can set echo cancellation to 0 otherwise leave default.	+	You can activate MWI (Message Waiting Indicator) to be notified when you receive a new Voicemail.
-	Default codec selection is adequate and will use highest quality g.711. If you have low bandwidth try unchecking g711 so calls default to GSM (make sure GSM is also checked on voip.ms server config).  g.729 is not supported in this softphone.	+
-	Note: Whenever you make changes make sure to click the '''Save''' button to save them to your profile.	+	Additionally, you can lower the registration interval to 60.
-	[[category:softphones]]	+

---

Revision as of 00:50, 19 January 2024

PhonerLite is a clearly arranged application for Windows. PhonerLite enables your PC to use it for Internet telephony (VoIP, Voice overIP). Pre-conditions are a full-duplex sound card, a microphone and speakers (alternatively a headset), an Internet connection and an account from a provider supporting the protocol SIP. PhonerLite supports several SIP profiles, each configurable independently.

You will find a step by step below on configuring PhonerLite with VoIP.ms

Configuration Details

• 1. Download PhonerLite at http://phonerlite.de/download_en.htm
• 2. Once downloaded, open and install it.
• 3. Once installed and opened, you will be greeted with the following window. Make sure to select ‘’’Manual Configuration’’ and fill the following fields:
• A. Proxy/Registrar: Set the VoIP.ms server you wish to register to. For a list of servers available, click | here
• B. Domain/Realm : Same server you’ve set in the previous field.

• 4. Press > and fill the next fields:
• A. User Name: Set your 6-digit main account username or sub account.
• B. Authentication Name: Same as previous field
• C. Password: Set your main account or sub account password.

• 5. Press > and then the check mark. You are now registered and can proceed with making phone calls!

You can activate MWI (Message Waiting Indicator) to be notified when you receive a new Voicemail.

Additionally, you can lower the registration interval to 60.