Calls Cost - VoIP.ms Wiki

Check out our YouTube channel to watch our simple tutorials that will help you set up most of our features.

Calls Cost

From VoIP.ms Wiki

(Difference between revisions)
Jump to: navigation, search
[quality revision][draft revision]
Line 1: Line 1:
-
VOIP.MS charges their calls based on a 6 secs period increment. This applies for all countries except for Mexico where it apply a 60 sec increment.
+
VOIP.MS charges their calls based on a 6 seconds period increment. This applies for all countries except for Mexico where it applies a 60 seconds increment.
Here is a short explanation about how this works.
Here is a short explanation about how this works.
Line 5: Line 5:
The Billing Increment is a call duration measurement unit expressed in seconds. 1 minute is devided on 10 periods of 6 seconds.  
The Billing Increment is a call duration measurement unit expressed in seconds. 1 minute is devided on 10 periods of 6 seconds.  
-
You could also use the next formula:  (per minute rate / number of increments per minute) * (duration of call / billing increment)
+
You could also use the next formula:   
 +
 
 +
(per minute rate / number of increments per minute) * (duration of call / billing increment)
 +
(0.05/5)* (30/6)
Line 12: Line 15:
(0.05 USD )* (10 periods on a minute) = $0.50 USD
(0.05 USD )* (10 periods on a minute) = $0.50 USD
-
 
+
[[File:6_secs.JPG|100pix]]
-
===10 Periods of $0.05 USD in a minute===
+
-
[[File:6_secs.JPG|300px]]
+
-
 
+
The system allways registers the number of cycles of 6 secs, therefore if you make a call of 27 sec, you will be charged for 30 sec as you are running in the 5th period of 6.
The system allways registers the number of cycles of 6 secs, therefore if you make a call of 27 sec, you will be charged for 30 sec as you are running in the 5th period of 6.

Revision as of 20:42, 20 May 2011

VOIP.MS charges their calls based on a 6 seconds period increment. This applies for all countries except for Mexico where it applies a 60 seconds increment.

Here is a short explanation about how this works.

The Billing Increment is a call duration measurement unit expressed in seconds. 1 minute is devided on 10 periods of 6 seconds.

You could also use the next formula:

(per minute rate / number of increments per minute) * (duration of call / billing increment) (0.05/5)* (30/6)


Lets say there is a rate of $0.50 USD per minute, then the user will be charged for 5 cents per each period of 6 seconds.

(0.05 USD )* (10 periods on a minute) = $0.50 USD

100pix

The system allways registers the number of cycles of 6 secs, therefore if you make a call of 27 sec, you will be charged for 30 sec as you are running in the 5th period of 6.

Personal tools
Namespaces
Variants
Actions
VoIP.ms Wiki
Guides 🇨🇦
Guías 🇲🇽