Grandstream DP750/DP720

From VoIP.ms Wiki

[quality revision]

[draft revision]

Revision as of 15:52, 5 June 2019 (view source) Joseph (Talk | contribs) (Added proper styles) ← Older edit		Revision as of 17:14, 2 September 2019 (view source) Jannatul (Talk | contribs) Newer edit →
Line 55:		Line 55:
	* Ensure the SIP account that you created in step 6 is select in the '''Line 1''' column for each handset.		* Ensure the SIP account that you created in step 6 is select in the '''Line 1''' column for each handset.
	* Click on the '''Save and Apply''' button.		* Click on the '''Save and Apply''' button.
		+
		+	==Guide Links==
		+	In the event where you need the guides directly from Grandstream, you may find the user and admin manual guides below:
		+
		+	User Manual : [http://www.grandstream.com/sites/default/files/Resources/DP750_DP720_User_Guide.pdf Download PDF]
		+
		+	Admin Manual : [http://www.grandstream.com/sites/default/files/Resources/DP750_DP720_Administration_Guide.pdf Download PDF]

---

Revision as of 17:14, 2 September 2019

Grandstream DP750 Configuration Detail

1. Type the DP715 Base Station IP address in your PC browser e.g. http://192.168.2.1

2. Log in using username and password of "admin" to configure the DP750 Base Station.

3. Navigate to the Profiles > Profiles 1, and select ' General Settings '.

• Select a name. This is only for your own use.
• One of VoIP.ms multiple servers, you can choose the one closest to your location
• Click on the Save and Apply button.

4. Navigate to the SIP Settings > Basic Settings menu on the left.

• Select either UDP, or if your account is configured to use SRTP encryption, select TLS/TCP.
• Set the Local SIP Port to 5061.
• Click on the Save and Apply button.

5. Navigate to the Profiles > Profile 1 > Audio Settings.

• Select both In-Audio and via RTP for the send DTMF option.

• If you are using SRTP / TLS/TCP, ensure the SRTP Mode option is set to Enabled and Forced.
• Click on the Save and Apply button.

6. Navigate to DECT > Sip Account Settings.

• In the Account 1 line, enter your SIP User ID into both the SIP User ID and Authenticate ID fields.
• Enter the password for the SIP account in the password field.
• Enter a name for the SIP account in the Name field. This name will be displayed on the handsets.
• Click on the Save and Apply button.

7. Navigate to DECT > Handset Line Settings.

• Ensure the SIP account that you created in step 6 is select in the Line 1 column for each handset.
• Click on the Save and Apply button.

Guide Links

In the event where you need the guides directly from Grandstream, you may find the user and admin manual guides below:

User Manual : Download PDF

Admin Manual : Download PDF