ShoreTel
From VoIP.ms Wiki
| [draft revision] | [draft revision] |
| Line 1: | Line 1: | ||
| - | This guide will cover the basics of getting your ShoreTel phone system working with a VoIP.ms SIP trunk. | + | This guide will cover the basics of getting your ShoreTel phone system working with a VoIP.ms SIP trunk. The ShoreTel documentation is not quite complete, although overbearing, so the purpose of this guide is a quick and dirty to get a trunk up and running and provide you with the couple of little config bits that the ShoreTel documentation lacks. |
For this guide, I am using a fresh install of Server2008 with ShoreTel Server 14.2. Server 2008 will need SP1 applied, .NET Framework 4.5 installed, UAC disabled, and all other documented prerequisites fulfilled (SMTP, QWAVE, FTP, IIS, etc) for the installation of ShoreTel Server. | For this guide, I am using a fresh install of Server2008 with ShoreTel Server 14.2. Server 2008 will need SP1 applied, .NET Framework 4.5 installed, UAC disabled, and all other documented prerequisites fulfilled (SMTP, QWAVE, FTP, IIS, etc) for the installation of ShoreTel Server. | ||
| Line 5: | Line 5: | ||
Once ShoreTel Server is installed, navigate to the Director homepage and log in with the default user/pass of admin/changeme | Once ShoreTel Server is installed, navigate to the Director homepage and log in with the default user/pass of admin/changeme | ||
| - | Steps | + | Steps: |
| - | + | ||
- Config SIP profile | - Config SIP profile | ||
- Config trunk group | - Config trunk group | ||
- config indiv. trunk | - config indiv. trunk | ||
| + | |||
| + | '''''Configuring the SIP profile''''' | ||
| + | [[File:Example.jpg]] | ||
Revision as of 02:11, 15 January 2016
This guide will cover the basics of getting your ShoreTel phone system working with a VoIP.ms SIP trunk. The ShoreTel documentation is not quite complete, although overbearing, so the purpose of this guide is a quick and dirty to get a trunk up and running and provide you with the couple of little config bits that the ShoreTel documentation lacks.
For this guide, I am using a fresh install of Server2008 with ShoreTel Server 14.2. Server 2008 will need SP1 applied, .NET Framework 4.5 installed, UAC disabled, and all other documented prerequisites fulfilled (SMTP, QWAVE, FTP, IIS, etc) for the installation of ShoreTel Server.
Once ShoreTel Server is installed, navigate to the Director homepage and log in with the default user/pass of admin/changeme
Steps:
- Config SIP profile - Config trunk group - config indiv. trunk
Configuring the SIP profile
