Asterisk IAX2
From VoIP.ms Wiki
(Difference between revisions)
| [quality revision] | [quality revision] |
90210chris (Talk | contribs) (→Asterisk (IAX2)) |
|||
| Line 2: | Line 2: | ||
<nowiki> | <nowiki> | ||
| + | [general] | ||
register => 100000:[email protected] | register => 100000:[email protected] | ||
Revision as of 13:25, 17 October 2014
iax.conf
[general] register => 100000:[email protected] [voipms] type=friend username=100000 (Replace with your 6 digit Main SIP Account User ID or Sub Account username, i.e. 123456 or 123456_sub) secret=johnspassword ;your password context=mycontext host=atlanta.voip.ms (one of our multiple servers, you can choose the one closer to your location) disallow=all allow=ulaw ; allow=g729 ; uncomment if you support it insecure=port,invite requirecalltoken=no
extensions.conf
[mycontext]
; Make sure to include inbound prior to outbound because the _NXXNXXXXXX handler will match the incoming call and create a loop
include => voipms-inbound
include => voipms-outbound
[voipms-outbound]
exten => _1NXXNXXXXXX,1,Dial(IAX2/voipms/${EXTEN})
exten => _1NXXNXXXXXX,n,Hangup()
exten => _NXXNXXXXXX,1,Dial(IAX2/voipms/1${EXTEN})
exten => _NXXNXXXXXX,n,Hangup()
exten => _011.,1,Dial(IAX2/voipms/${EXTEN})
exten => _011.,n,Hangup()
exten => _00.,1,Dial(IAX2/voipms/${EXTEN})
exten => _00.,n,Hangup()
; inbound context example for your DID numbers, do not add the number 1 in front
[voipms-inbound]
exten => 7863643011,1,Answer() ;your DID
