Grandstream GXP2200
From VoIP.ms Wiki
| [draft revision] | [draft revision] |
m (convert wiki.voip.ms extlinks to internal wikilinks) |
(→Register the Grandstream GXP2200 with Voip.ms) |
||
| Line 33: | Line 33: | ||
*'''NAT Traversal:''' Keep-alive | *'''NAT Traversal:''' Keep-alive | ||
[[File:GPX2200_Network_Settings_N.png|800px]] | [[File:GPX2200_Network_Settings_N.png|800px]] | ||
| + | [[category:SIP phones]] | ||
Revision as of 23:04, 31 December 2013
The Grandstream GXP2200 has a 480x272 pixel capacitive touch screen TFT LCD, 6 lines with up to 6 SIP accounts, HD wideband audio and Supports Android Operating System 2.3 and the vast number of 3rd party Android applications.
Enter the Grandstream GXP2200 Configuration Panel
Connect the GXP2200 to your network and power up the device, after this wait 60 seconds and on the LCD screen you'll see a windows to add accounts, on the top of that windows you'll see the IP address of your device (192.168.xx.xxx) save that IP address.
On your computer open your preferred browser and put the IP address in the address bar.
Once the page is loaded it will ask you for a Username and Password, the default is Username: admin Password: admin
Register the Grandstream GXP2200 with Voip.ms
Once you entered on the configuration panel, select General Settings on the panel on the left and select Account on the menu at the top of the page and complete the following fields:
- Account Active: Checked
- Account Name Enter a name of your choice (it can be your name or company name)
- SIP Server: servername.voip.ms (Pick one of VoIP.ms multiple servers)
- SIP User ID: 100000 (Replace with your Main SIP account or Subaccount UserID, e.g. 198765 or 198765_sub)
- SIP Authenticate ID: 100000 (Replace with your Main SIP account or Subaccount UserID, e.g. 198765 or 198765_sub)
- SIP Authenticate Password: ********* (Use the SIP account password-By default the same as the Customer portal)
- Name: Enter a name of your choice (it can be your name or company name)
- If you want to register your Main account, you can find the Username and Password information by logging into your Customer Portal.
- If you want to register a sub-account you will have to use the credentials that you set when you created the sub-account.
Once you have Saved the Account information, click on the Network Settings option on the left and under the Account you configured complete the following fields:
- Outbound Proxy: servername.voip.ms (Pick one of VoIP.ms multiple servers)
- NAT Traversal: Keep-alive
