Grandstream HandyTone 486
From VoIP.ms Wiki
| [draft revision] | [draft revision] |
90210chris (Talk | contribs) (→Configuration Detail) |
90210chris (Talk | contribs) (→Configuration Detail) |
||
| Line 57: | Line 57: | ||
Click on the "Reboot" button at the bottom of the form. | Click on the "Reboot" button at the bottom of the form. | ||
[[File:Example2.jpg]] | [[File:Example2.jpg]] | ||
| - | |||
| - | |||
| - | |||
| - | |||
| - | |||
| - | |||
| - | |||
| - | |||
| - | |||
| - | |||
| - | |||
| - | |||
| - | |||
| - | |||
| - | |||
| - | |||
| - | |||
| - | |||
| - | |||
== See also == | == See also == | ||
* [[Grandstream HandyTone 286]] | * [[Grandstream HandyTone 286]] | ||
[[category: Analog Telephone Adapters]] | [[category: Analog Telephone Adapters]] | ||
Revision as of 20:01, 29 July 2013
Configuration Detail
STEP 1
Connect an Ethernet cable from your PC to the Handytone 486 LAN port. Make sure that your PC Ethernet Internet Protocol (TCP/IP) is set to “Obtain an IP address automatically” .
STEP 2
Go to any browser equipped computer on your network and enter the address: http://192.168.2.1
STEP 3
You will be prompted to enter a password, the default is "admin", then click the "Login" button.
STEP 4
Plug in an Ethernet cable from your Cable or DSL modem into the WAN port of the Handytone 486. Go to BASIC SETTINGS tab. If your ISP assigns you IP number by PPPOE, enter the information assigned by your ISP into the circled areas.
.gif)
STEP 5
Go to ADVANCED SETTINGS tab.
SIP Server: atlanta.voip.ms (one of our multiple servers)
SIP User ID: 100000 (Your VoIP.ms username)
Authenticate ID: 100000 (Your VoIP.ms username)
Authenticate Password: ********* (Your VoIP.ms Account Password)
Name: Enter your full name, this will show up as part of your caller ID.
User ID is phone number: No
SIP Registration: Yes
NAT transversal : 10
STEP 6
Click on the "Update" button at the bottom of the form.
STEP 7
You will be brought to a confirmation screen on which you will click on the only option available: "Click to view your changes".
STEP 8
Click on the "Reboot" button at the bottom of the form.
