Grandstream HandyTone 286

From VoIP.ms Wiki

Revision as of 17:13, 3 June 2013

Grandstream HandyTone 286

The HandyTone 286 manual can be found here.

Configuration Details

STEP 1 - Connect your router with the supplied Ethernet network cable to the HandyTone. Now connect your phone to the HandyTone. Finally plug the supplied power cable into the HandyTone.

STEP 2 - Wait 60 seconds after plugging your HandyTone in.

STEP 3 - Pick up the phone connected to the HandyTone and dial the * key on your phone 3 times (* * *).

STEP 4 - Have a pen and paper ready. You will hear a message - "Enter a menu option", then enter 0 2 on your phone. You will now hear a message giving you the IP address of your HandyTone such as - "192.168.001.010" write this number down.

STEP 5 - Open a web browser on your computer such as Internet Explorer and enter the IP address you heard in step 4 as the address (I.E. where you would normally enter www.yahoo.com). Please note: some browsers will require you to remove leading zero's ( 0 's ) in the IP address. For example if you heard "192.168.001.010" you should change this to "192.168.1.10".

STEP 6 - You should now see a page that looks like this:

STEP 7 - Enter the password for the HandyTone in the password field. The default administrator password for the HandyTone is "admin" (without quotes).

STEP 8 - After entering the password you should see a screen that looks roughly like this:

Step 9 - Click on Account 1 to configure your first line.

Step 10 - Fill the followings fields.

• SIP Server: atlanta.voip.ms (or use one of our multiple servers)
• SIP User ID: 100000 (Replace with your 6 digits Main SIP account UserID or Sub Account user name, i.e. 123456 or 123456_sub)
• Authenticate ID: ********* (Replace with your 6 digits Main SIP account UserID or Sub Account user name, i.e. 123456 or 123456_sub)
• Authenticate Password: ********* (SIP Account Password)
• User ID is phone number: No
• Name: (Enter any name you like)
• SIP Registration: Yes
• Register Expiration: 180
• NAT transversal : No
  • Notes: NAT Traversal can be set to Yes if you are behind a router (even if you do not set a value in the STUN server field). Indeed according to the reference guide, with no specified STUN server, then the phone will only periodically (every 20 seconds by default) send a blank UDP packet (with no payload data) to the SIP server to keep the mapped port open on the NAT.
• Home NPA: Empty (Some tests show that this field should be kept empty or you will encountered difficulties with some numbers ending with a busy signal [tested with 418 in home NPA, and a 1-877 number] )

Message Waiting Indicator

To enable this feature with your Grandstream HandyTone 286 you need to associate a voicemail with the account (or subaccount) you have registered in the device and set the SUBSCRIBE for MWI option to YES.

Known Issues

When the device hangs up the call after 17-20 minutes into the call.

In both FXS and FXO config pages change these values:

UAC Specify refresher: UAS

UAS Specify refresher: UAS

Force INVITE: Yes