Fortinet FortiFone FON-570
From VoIP.ms Wiki
| [checked revision] | [checked revision] |
(→How to change the time setting) |
(→How to change the time setting) |
||
| Line 81: | Line 81: | ||
: '''Time zone''': Select your time zone by using the drop-down. <br/> | : '''Time zone''': Select your time zone by using the drop-down. <br/> | ||
: '''Location''': Select location you are in for daylight saving. <br/> | : '''Location''': Select location you are in for daylight saving. <br/> | ||
| - | : '''Primary Server''': pool.ntp.org (optional) <br/> | + | : '''Primary Server''': pool.ntp.org ''(optional)'' <br/> |
| - | : '''Time Format''' : Hour 24 (Optional) <br/> | + | : '''Time Format''' : Hour 24 ''(Optional)'' <br/> |
| - | : '''Date Format''' : | + | : '''Date Format''' : YYYY-MM-DD ''(Optional)''<br/> |
Then click on [Confirm] button. | Then click on [Confirm] button. | ||
Revision as of 20:56, 9 January 2020
FortiFone is equipped with high-definition audio and reliable performance, enabling efficient and clear conversations. It offers a range of selection from entry-level phones to executive-level phones that offer a variety of features, with programmable line and extension appearances.
Contents |
Configuration Details
Getting the IP address number
To find the IP Address of your IP Phone you can press the button "OK" where the arrows on the phone and this is supposed to get you directly on the status page.
Otherwise if is not the case, press the button "Menu" directly on the screen, then press on "Status".
You will be able to see at the "General" Tab, your IPv4 address.
Login into your device via Web Interface
Open your prefered web broswer, as example Google Chrome and put in the url bar http://ThePhoneIPAddress
Setting up your device with your SIP credentials
To register your VoIP.ms Main Account/Sub account, you will need to go on the upper navigation bar and click on the tab "Account".
This phone allows you to have up to 16 SIP accounts. You must register 1 SIP main or sub-account per account. For example, you can define 2 accounts separately and they will use different credentials and may display different caller IDs depending on your needs.
Line Active : Needs to be Enabled if you want to use this line.
Display Name : Is your Outbound caller ID Name. We suggest to enter it in CAPITAL LETTER, also note that most of landline provider won't display more than 15 characters.
Register Name :
User Name : This is your SIP main account/sub account password.
Password : Is your SIP main account/sub account password.
Server Host : Your preferred VoIP.ms Servers and indicating the port 5060 or the alternative port 5080 or 42872. Note that to be able to received incoming calls, your phone needs to be on the same PoP Server as your DID.
Transport : UDP
Server Expires : 300
Enabling the SIP-TLS Call Encryption
To activate the call encryption on your account, first of all, you needs to activate the option on your main/sub account. Please see the wiki here Call encryption
Once your main/sub account is configured to use the SIP traffic Encryption you will need to change two settings.
Go into your phone admin web portal, then click on the upper navigation button "Account". In your SIP account, you needs to change the Transport protocol to TLS.
Server Host : You need to specify the port 5061 or the alternative port 5081 or 42873.
Transport : Choose the transportation protocol TLS.
Once the previous part is done. You need to go on the "Advanced" button at the left navigation bar,
RTP Encryption(SRTP): Compulsory
How to change the time setting
Go on the upper navigation bar and click on "Settings". Then, on the left navigation bar "Time & Date".
- Time Synchronized via DHCP: Yes
- Time zone: Select your time zone by using the drop-down.
- Location: Select location you are in for daylight saving.
- Primary Server: pool.ntp.org (optional)
- Time Format : Hour 24 (Optional)
- Date Format : YYYY-MM-DD (Optional)
Then click on [Confirm] button.
