User:Roy/Sandbox
From VoIP.ms Wiki
| Line 24: | Line 24: | ||
[[File:AudioCode420MainPage.png|thumb|none|300px|Click to enlarge]] | [[File:AudioCode420MainPage.png|thumb|none|300px|Click to enlarge]] | ||
| + | |||
| + | ===Setting up your device with your SIP credentials=== | ||
| + | From the left panel click on the "Quick setup" folder and then at "Quick Setup" icon. Three sections will show up on the right panel, '''LAN Setup''', '''SIP Proxy and Registrar''' and '''Line Settings'''. | ||
Revision as of 17:26, 25 June 2019
Contents |
Configuration Detail
In order to set up your new Audiocodes 420 HD IP phone you only need to get its IP address and access to your device's settings from your web browser.
Getting the IP address number
As soon as you have plugged your phone to your local router your phone will receive its own local IP address. You can get this number by following these steps:
1. Press the MENU key located on the device.
2. Go to option 5 "Device Status" and press OK button.
3. Choose option 1 "Network Settings" and press OK button.
4. Scroll down to "IP Address" and take note of this number.
Login into your device via Web Interface
From your PC, open your favorite web browser and at the URL bar, type the IP address you get from your device. A pop-up window will show up asking for your phone's login credentials.
Username: admin
Password: 1234
You will reach the main page of your Audiocodes 420 HD IP phone
Setting up your device with your SIP credentials
From the left panel click on the "Quick setup" folder and then at "Quick Setup" icon. Three sections will show up on the right panel, LAN Setup, SIP Proxy and Registrar and Line Settings.
