User:Roy/Sandbox

From VoIP.ms Wiki

Revision as of 20:44, 25 June 2019 (view source) Roy (Talk | contribs) (→Getting the IP address number) ← Older edit		Latest revision as of 18:26, 4 August 2025 (view source) Roy (Talk | contribs)
(142 intermediate revisions not shown)
Line 1:		Line 1:
-	__TOC__	+	==HOW DOES THIS WORK?==
		+	You can use our service to place and receive calls just using your internet connection, no matter where you are as long as you have internet. You can use an IP phone, ATA adapter (to use a traditional phone) or a softphone (an App installed on your cellphone or PC)
		+	==RATES==
		+	VoIP.ms is a prepaid service where you add funds to your account ($15 USD min) and the following rates are deducted from it:
-	==Configuration Detail==	+	You only pay a monthly fee for each of your numbers + in/out minutes usage.
-	In order to set up your new '''Audiocodes 420 HD IP phone''' you only need to get its IP address and access to your device's settings from your web browser.	+	'''Monthly fee for the phone number'''
-	===Getting the IP address number===	+	*Per minute plan:<br>
-	As soon as you have plugged your phone to your local router your phone will receive its own local IP address. You can get this number by following these steps:	+	$0.85 USD Monthly + $0.009 USD per minute inbound<br>
		+	$0.01 USD outbound per minute for US/CAN<br>
-	'''1.''' Press the MENU key located on the device.<br>	+	*Flat rate plan:<br>
-	'''2.''' Go to option 5 '''"Device Status"''' and press '''OK''' button.<br>	+	$4.25 USD Monthly, 3500 free inbound minutes<br>
-	'''3.''' Choose option 1 '''"Network Settings"''' and press '''OK''' button.<br>	+	$0.01 USD outbound per minute for US/CAN<br>
-	'''4.''' Scroll down to "IP Address" and take note of this number.	+
-	===Login into your device via Web Interface===	+	SMS/MMS rates:<br>
-	From your PC, open your favorite web browser and at the URL bar, type the IP address you get from your device. A pop-up window will show up asking for your phone's login credentials.	+	$0.0075 USD per SMS<br>
		+	$0.02 USD per MMS<br>
		+	==FIRST STEPS - ADD FUNDS==
		+	1. Go to Finances -> Add funds, and make your 1st payment. DO NOT use the autobilling for your 1st payment.<br>
		+	2. WAIT 5 minutes for balance to be updated and before you try to buy or port a number.<br>
		+	==PORTING FROM VOIPO==
		+	1. Log in to your VoIPo account at account.voipo.com.<br>
		+	2. Go to Menu -> Account -> Invoices<br>
		+	3. Print your invoice and save it as PDF/JPG<br>
		+	4. Now log into your voipms portal and go to DID Numbers -> DID portability<br>
		+	5. Look for "If you want to start a porting process from VOIPo, Click here" and click it<br>
		+	6. Fill in the following:<br>
		+	*VOIPo Account number: One of your voipo phone numbers
		+	*Proof of Ownership: upload your voipo invoice
		+	*List of Numbers: list your voipo number(s) you want to bring
		+	*Click "Submit"
-	[[File:Sign in pop-up window.png|thumb|none|300px|Click to enlarge]]	+	'''Done! The port process takes 1-2 business days an email notification will be send once the port is completed.'''
		+	==SETTING UP YOUR HT==
		+	0. Factory reset your HT, press the RESET button located at the rear panel for 7-10 seconds
-	Username: '''admin'''<br>	+	1. Pick up your phone and dial *** to access into the system configuration menu, once in there press 0 2 and your device will play back its IP address, a number like 192.168.xxx.xxx, write it down
-	Password: '''1234'''<br>	+
-	You will reach the main page of your '''Audiocodes 420 HD IP phone'''	+	2. Open a new tab on your web browser and type this number, you will be attempting to log into your device's settings. The password to access is admin
-	[[File:AudioCode420MainPage.png|thumb|none|300px|Click to enlarge]]	+	3. Once logged in, head to FXS1 tab and fill the following:
-	===Setting up your device with your SIP credentials===	+	*'''Primary SIP Server:'''
-	From the left panel click on the "Quick setup" folder and then at "Quick Setup" icon. Three sections will show up on the right panel, '''LAN Setup''', '''SIP Proxy and Registrar''' and '''Line Settings'''.	+	*'''SIP User ID:'''
		+	*'''Authenticate ID:'''
		+	*'''Authenticate Password:'''
		+	*Name:
-	'''1.''' At '''"SIP Proxy and Registrar"''' we can set:	+	4. Extra settings for better performance (might not be available for some models):
-	'''Use SIP Proxy:''' Enable<br>	+	*SIP Transport: TCP
-	'''Proxy IP Address or Host Name:''' Any of our [http://wiki.voip.ms/article/Choosing_Server servers]. I.E. denver.voip.ms<br>	+	*Register Expiration: 5 minutes or 300 seconds
-	'''Proxy Port:''' 5060<br>	+	*Enable SIP OPTIONS keep alive: Yes
-	'''Use SIP Proxy IP and Port for Registration:''' Enable<br>	+	*Allow incoming SIP messages from SIP Proxy only: Yes
-	'''Use SIP Registrar:''' Disable<br>	+	*Use P-Access-Network-Info Header: No
-		+	*Use P-Emergency-info Header: No
-	'''Note:''' Bear in mind to use the same VoIP server your VoIP number is using.	+
-	You can check what VoIP server your VoIP number is using from your VoIP.ms customer portal	+
-	at '''DID Numbers>> Manage DIDs''' and under '''POP''' column.	+
-	You can choose any server as long as the one in your portal and the one in this field matches,	+
-	otherwise, incoming calls won't ring.	+
-		+
-	'''2.''' At '''"Line Settings"''' we can set: <br>	+
-		+
-	'''Line Number:''' 1<br>	+
-	'''Line 1 Activate:''' Enable<br>	+
-	'''Line 1 Display Name:''' Caller ID name field (Not guarantee so be sent)<br>	+
-	'''Line 1 User ID:''' 100000 (your VoIP.ms main account number or sub-account name)<br>	+
-	'''Line 1 Authentication User Name:''' 100000 (your VoIP.ms main account number or sub-account name)<br>	+
-	'''Line 1 Authentication Password:''' ********* (account or sub-account password)<br>	+
-		+
-	[[File:AudioCode420 SIPcredentials.png|thumb|none|300px|Click to enlarge]]	+
-		+
-	==Extra settings==	+
-	The following settings will improve your device's performance.	+
-		+
-	===Registration time and NAT Keep alive settings===	+
-	These settings will keep your device awake and ready to receive incoming calls all the time. From the left panel, go to Voice Over IP folder>> Signaling Protocols and from the right panel modify:	+
-		+
-	'''Enable Registrar Keep Alive:''' Enable<br>	+
-	'''Registrar Keep Alive Period:''' 50 Seconds<br>	+
-	'''Registration Expires:''' 300 Seconds<br>	+
-		+
-	[[File:AudioCode420 RegisterTime.png|thumb|none|300px|Click to enlarge]]	+
-		+
-	===Audio Codecs===	+
-	Make sure to enable only supported codecs by VoIP.ms. Go to Voice Over IP>> Media Streaming, from the left panel. You can enable  audio codecs '''G729'''and '''G711u''' as first and second option and set all the other options to '''none'''.	+
-		+
-	[[File:AudioCode420 AudioCodecs.png|thumb|none|300px|Click to enlarge]]	+

---

Latest revision as of 18:26, 4 August 2025

Contents 1 HOW DOES THIS WORK? 2 RATES 3 FIRST STEPS - ADD FUNDS 4 PORTING FROM VOIPO 5 SETTING UP YOUR HT

HOW DOES THIS WORK?

You can use our service to place and receive calls just using your internet connection, no matter where you are as long as you have internet. You can use an IP phone, ATA adapter (to use a traditional phone) or a softphone (an App installed on your cellphone or PC)

RATES

VoIP.ms is a prepaid service where you add funds to your account ($15 USD min) and the following rates are deducted from it:

You only pay a monthly fee for each of your numbers + in/out minutes usage.

Monthly fee for the phone number

• Per minute plan:
  

$0.85 USD Monthly + $0.009 USD per minute inbound
$0.01 USD outbound per minute for US/CAN

• Flat rate plan:
  

$4.25 USD Monthly, 3500 free inbound minutes
$0.01 USD outbound per minute for US/CAN

SMS/MMS rates:
$0.0075 USD per SMS
$0.02 USD per MMS

FIRST STEPS - ADD FUNDS

1. Go to Finances -> Add funds, and make your 1st payment. DO NOT use the autobilling for your 1st payment.
2. WAIT 5 minutes for balance to be updated and before you try to buy or port a number.

PORTING FROM VOIPO

1. Log in to your VoIPo account at account.voipo.com.
2. Go to Menu -> Account -> Invoices
3. Print your invoice and save it as PDF/JPG
4. Now log into your voipms portal and go to DID Numbers -> DID portability
5. Look for "If you want to start a porting process from VOIPo, Click here" and click it
6. Fill in the following:

• VOIPo Account number: One of your voipo phone numbers
• Proof of Ownership: upload your voipo invoice
• List of Numbers: list your voipo number(s) you want to bring
• Click "Submit"

Done! The port process takes 1-2 business days an email notification will be send once the port is completed.

SETTING UP YOUR HT

0. Factory reset your HT, press the RESET button located at the rear panel for 7-10 seconds

1. Pick up your phone and dial *** to access into the system configuration menu, once in there press 0 2 and your device will play back its IP address, a number like 192.168.xxx.xxx, write it down

2. Open a new tab on your web browser and type this number, you will be attempting to log into your device's settings. The password to access is admin

3. Once logged in, head to FXS1 tab and fill the following:

• Primary SIP Server:
• SIP User ID:
• Authenticate ID:
• Authenticate Password:
• Name:

4. Extra settings for better performance (might not be available for some models):

• SIP Transport: TCP
• Register Expiration: 5 minutes or 300 seconds
• Enable SIP OPTIONS keep alive: Yes
• Allow incoming SIP messages from SIP Proxy only: Yes
• Use P-Access-Network-Info Header: No
• Use P-Emergency-info Header: No