ShoreTel
From VoIP.ms Wiki
(Difference between revisions)
| [draft revision] | [draft revision] |
(Created page with "This guide will cover the basics of getting your ShoreTel phone system working with a VoIP.ms SIP trunk. For this guide, I am using a fresh install of Server2008 with ShoreTel ...") |
|||
| Line 4: | Line 4: | ||
Once ShoreTel Server is installed, navigate to the Director homepage and log in with the default user/pass of admin/changeme | Once ShoreTel Server is installed, navigate to the Director homepage and log in with the default user/pass of admin/changeme | ||
| + | |||
| + | Steps | ||
| + | - Add physical switch or softswitch as licence allows. | ||
| + | - Config SIP profile | ||
Revision as of 16:01, 20 November 2015
This guide will cover the basics of getting your ShoreTel phone system working with a VoIP.ms SIP trunk.
For this guide, I am using a fresh install of Server2008 with ShoreTel Server 14.2. Server 2008 will need SP1 applied, .NET Framework 4.5 installed, UAC disabled, and all other documented prerequisites fulfilled for the installation of ShoreTel Server.
Once ShoreTel Server is installed, navigate to the Director homepage and log in with the default user/pass of admin/changeme
Steps
- Add physical switch or softswitch as licence allows. - Config SIP profile
