Firewall
From VoIP.ms Wiki
(Difference between revisions)
| [checked revision] | [checked revision] |
90210chris (Talk | contribs) (Created page with "Setup When configuring your firewall to work with VoIP.ms, there are certain ports which need to be enabled to avoid quality and/or stability issues. Generally these ports are ...") |
90210chris (Talk | contribs) |
||
| Line 1: | Line 1: | ||
| - | Setup | + | == Setup == |
| Line 5: | Line 5: | ||
| - | SIP Ports | + | == SIP Ports == |
Port = 5060 | Port = 5060 | ||
| Line 12: | Line 12: | ||
Direction = Incoming and Outgoing | Direction = Incoming and Outgoing | ||
| - | RTP Ports | + | |
| + | |||
| + | == RTP Ports == | ||
The RTP port may vary by device. If configuring a firewall you will want to configure a range which includes the default RTP port in your device. | The RTP port may vary by device. If configuring a firewall you will want to configure a range which includes the default RTP port in your device. | ||
| Line 19: | Line 21: | ||
Protocol = UDP or UDP/TCP | Protocol = UDP or UDP/TCP | ||
Direction = Incoming and Outgoing | Direction = Incoming and Outgoing | ||
| + | |||
*This is for users who may require a port range for their firewall or router | *This is for users who may require a port range for their firewall or router | ||
If you still have questions on this topic please contact us for further assistance. | If you still have questions on this topic please contact us for further assistance. | ||
Revision as of 16:31, 13 October 2014
Setup
When configuring your firewall to work with VoIP.ms, there are certain ports which need to be enabled to avoid quality and/or stability issues. Generally these ports are configured by default; however for users requiring the specific port numbers and protocols please use the information below:
SIP Ports
Port = 5060 *Port range = 5060 - 5080 Protocol = UDP or UDP/TCP Direction = Incoming and Outgoing
RTP Ports
The RTP port may vary by device. If configuring a firewall you will want to configure a range which includes the default RTP port in your device.
Port range = 10001-20000 UD Protocol = UDP or UDP/TCP Direction = Incoming and Outgoing
- This is for users who may require a port range for their firewall or router
If you still have questions on this topic please contact us for further assistance.
