Polycom SoundStation IP 4000 Conference Phone

From VoIP.ms Wiki

[quality revision]

[quality revision]

Revision as of 17:34, 13 April 2011 (view source) FherNando (Talk | contribs) (→Configuration Details) ← Older edit		Revision as of 13:52, 8 July 2014 (view source) 90210chris (Talk | contribs) Newer edit →
(4 intermediate revisions not shown)
Line 1:		Line 1:
-	[[File:Polycom-4000-0.gif|300px|thumb|left|Polycom SoundStation IP 4000 Conference Phone]]	+	[[File:Polycom-4000-0.gif|300px|thumb|center|Polycom SoundStation IP 4000 Conference Phone]]
	<div style="width:100%;overflow:hidden;clear:both"></div>		<div style="width:100%;overflow:hidden;clear:both"></div>
Line 7:		Line 7:
	'''Get the IP'''		'''Get the IP'''
-	Start the Phone and it will get an IP from the DHCP Server, then it will display the IP on the Screen.	+	To obtain the IP address of your phone, press "Menu" followed by Status, Platform and Phone. The IP address is listed together with other phone information.
		+
		+	'''Enter the web interface'''
		+
		+	Open your favorite web browser and go to the IP address that you have obtained in the previous step.
Line 28:		Line 32:
	* Click the '''Submit''' button to save your settings.		* Click the '''Submit''' button to save your settings.
		+	[[Category:SIP phones]]
		+
		+	== '''Documentation:''' ==
		+	[http://supportdocs.polycom.com/PolycomService/support/global/documents/support/user/products/voice/soundstation_ip4000_user_guide_sip_2.0.x.pdf User's manual]
		+	[http://supportdocs.polycom.com/PolycomService/support/global/documents/support/setup_maintenance/products/voice/SoundPointIP_SoundStationIP_AdminGuide_SIP3_0_Eng_Rev_A.pdf Administrator Guide]

---

Revision as of 13:52, 8 July 2014

Configuration Details

Get the IP

To obtain the IP address of your phone, press "Menu" followed by Status, Platform and Phone. The IP address is listed together with other phone information.

Enter the web interface

Open your favorite web browser and go to the IP address that you have obtained in the previous step.

Configure Settings

• Go to Lines tab and then to Line 1
• Change Settings according to your Account values

• Click the Submit button to save your settings.
• Go to General tab and then to Audio Processing
• Set your Codec to the following:

• Click the Submit button to save your settings.

Documentation:

User's manual Administrator Guide