Gigaset A510 IP

From VoIP.ms Wiki

[draft revision]

[draft revision]

Revision as of 15:58, 11 December 2013 (view source) Joevoipms (Talk | contribs) (Created page with "Grandstream HandyTone 502 - HT502 <div style="width:100%;overflow:hidden;clear:both"></div> ==Configuration Detail== [[File:502_frontandback...") ← Older edit		Revision as of 19:21, 16 December 2013 (view source) Joevoipms (Talk | contribs) Newer edit →
Line 1:		Line 1:
-	[[File:Ht502.jpg|300px|thumb|left|Grandstream HandyTone 502 - HT502]]	+	[[File:Gigaset_a510_IP.jpg|500px|thumb|left|Gigaset a510 IP]]
	<div style="width:100%;overflow:hidden;clear:both"></div>		<div style="width:100%;overflow:hidden;clear:both"></div>
	==Configuration Detail==		==Configuration Detail==
-	[[File:502_frontandback.jpg]]	+	'''Connect the Gigaset a510 IP'''
		+
		+	1.
		+	2.
		+	3.
		+	4.
-	'''Connect the HandyTone'''	+	5.
-		+
-	1. Connect a standard touch-tone analog telephone (or fax machine) to PHONE port (or PHONE1,	+
-	PHONE2 port for HT386/496/502).	+
-		+
-	2. Connect a PSTN telephone line to LINE port (optional, applies to HT386/486/488/503 only).	+
-		+
-	3. Insert the Ethernet cable into the Ethernet port (HT286/386) or WAN port (HT486/488/496/502/503) of	+
-	HandyTone and connect the other end of the Ethernet cable to an uplink port (a router or a modem, etc.).	+
-		+
-	4. Connect a PC to the LAN port of HandyTone (optional, applies to HT486/488/496/502/503 only).	+
-	5. Insert the power adapter into the HandyTone and connect it to an electrical outlet.	+	6.
-	6. Using the HandyTone embedded web server or IVR (Interactive Voice Prompt) menu, you can further
-	configure the phone using either a static IP or DHCP.
	[[File:502.jpg]]		[[File:502.jpg]]
-	'''Configuring the HandyTone using a Web Browser'''	+	'''Configuring the Gigaset a510 IP'''
-	1. From the analog phone, press *** to get into the IVR menu. Enter option 02 to obtain the HandyTone’s IP	+	1.
-	address.	+
-	2. For HT486/488/496/502/503, please enable the “WAN side HTTP access” option by entering IVR	+	2.
-	option 12 and press 9. A reboot or power cycle of the HandyTone is required after this change. You can	+
-	also access the HandyTone’s web configuration from a PC connected to the LAN port via 192.168.2.1.	+
-	3. Type the HandyTone’s IP address in your PC browser.	+	3.
-	4. Log in using password “admin” to configure the HandyTone	+	4.
Line 63:		Line 53:
	'''		'''
-	== Known Issues and Resolutions ==
-	'''
-
-	'''Hearing an Echo on the Line:'''
-	Please go to your FXS port setting screen, that you are using with us, and verify that the option Disable Line Echo Canceler, is set to NO.
-	You can also adjust the setting Gain, where the Rx (Other Person) is a gain level for signals transmitted by FXS and Tx (You)
-	is a gain level for signals received by FXS.
-	'''Receiving Weird Calls Like from CallerID 100 or in the middle of the Night not showing in your CDR:'''
-	These calls are not going through our Network but rather through the internet directly to your ATA Device.
-	Please check in the Web GUI under each FXS port tab that this option is enabled:  Allow Incoming SIP Messages from SIP Proxy Only: Set to YES.
-	This will make sure you can only receive calls from VoIP.ms.
	[[category: Analog Telephone Adapters]]		[[category: Analog Telephone Adapters]]

---

Revision as of 19:21, 16 December 2013

Configuration Detail

Connect the Gigaset a510 IP

1.

2.

3.

4.

5.

6.

Configuring the Gigaset a510 IP

1.

2.

3.

4.

Step 1:

Click on FXS 1 to configure your first line.

Step 2:

Fill the followings fields.

• SIP Server: atlanta.voip.ms (one of our multiple servers)
• SIP User ID: 100000 (your VoIP.ms username)
• Authenticate Password: ********* (account password)
• User ID is phone number: No
• SIP Registration: Yes
• NAT transversal (STUN): No